Managing and printing jobs from the Tape Client
7.From the Printer pulldown menu in the Output Control group box, select the EPS printer to which you are sending the job (for instructions on setting up a printer and the Socket Gateway, refer to the chapter “Managing the tape client” or the online help for information on the Socket Gateway.)
8.From the Queue pulldown menu, select the queue to which you want to send the job. The queue must be set up for LCDS printing. (Refer to the Help screens accessed from the Queue Manager window for instructions on setting up queues.)
9.In the Document group box, select the initial JDL, JDE, and form (if applicable). (Refer to “Specifying the JDL, JDE, and form to start a job.”)
10.In the Quantity field, click the arrow buttons until the desired copy quantity is displayed.
11.In the End of Job field in Input Control group box, select the action that the tape drive will take at the end of the job.
Figure 2-2. End of Job field on Tape Client window
•If you do not check any fields, the tape will not rewind and will not upload.
•Rewind Tape will cause the tape to rewind at the end of the job.
•Unload Tape will cause the tape to unload at the end of the job.
12.In the Input Control group box, click Start to begin printing.
13.While jobs are being received and printed, you can check the Status column on the Job Manager window for the current job status. (Refer to “Checking job status.”)
Tape Client Job Submission Guide |