Xerox 701P21110 manual Lcds Resources window with Source menu displayed

Page 29

Managing and printing jobs from the Tape Client

3.On the Lcds Resources window, select from the Source pull- down menu the medium that contains the files that you want to import for your job. After a few seconds, a list of the directories on the source medium appears in the Directory field.

Figure 2-3. Lcds Resources window with Source menu displayed

4.Right-click in the resource list section (the large field at the right of the Directory and Selection fields).

5.Select Redisplay from the pop-up menu that appears. After a few seconds, a list of the resource files on the selected source medium is displayed.

6.From the resource list, select the resource files that you want to import.

•To select multiple files, hold down the <Control> key while you click each file name to highlight it.

•If you want to select files that are adjacent to each other on the list, hold down the <Shift> key while you click the first and last name in the range.

Tape Client Job Submission Guide

2-5

Image 29

Contents Tape client USA Table of contents Managing the Tape Client Managing and printing jobs from the Tape ClientLaser safety SafetyOzone information U. S. only Operation safety U. SOperation safety Europe Ventilation Operator accessible areasElectrical supply CE mark Europe only MaintenanceBefore cleaning your product Radio and telecommunications equipment directive Europe only For further information Safety Xii Tape Client Job Submission Guide About this guide ContentsIntroduction Conventions DocuPrint 2000 Series 100/115/135/155/180 EPS documentation DocumentationCd /usr/ucb Printing customer documentationTape Client overview Features and capabilitiesTape Client capabilities Supported tape formats IBM DOS/360 Power II HOST=POWERJob and tape status reporting Functional overviewStreaming and spooling transmission modes Tape dump Tape job accountingJob recovery Host computer tape formats Input processing from tape using Print Description LanguageTape codes Record formatsFormat Record structureOffline dump Overview of the printing process Managing and printing jobs from the Tape ClientTape Client window End of Job field on Tape Client window Importing resource files Preparing to print a tape jobLcds Resources window with Source menu displayed Lcds Resources window displaying resource files on tape Specifying files for printing Popup menu with Import selectedSpecifying the JDL, JDE, and form to start a job Document field on Tape Client window Job Descriptor Library window Moving over files on a tape Controlling input for tape jobsEnding a job Move Tape Mark window 10. Move Block window Moving over blocks on a tapeStarting and ending tape dump sessions Managing the Tape Client Accessing the Tape ClientSetting up the printer for offline printing Adding a printer Printer setup windowDeleting a printer Modifying a printerRename Device window Managing the tape driveClick Rewind or Unload Managing the tape job accounting logClick Print Log Viewing the job log Printing the job logPage Managing the Tape Client Tape Client Job Submission Guide JDL IndexINDEX-2