Xerox 701P21110 manual Electrical supply, Ventilation, Operator accessible areas

Page 8

Safety

Electrical supply

This product shall be operated from the type of electrical supply indicated on the product’s data plate label. If you are not sure that your electrical supply meets the requirements, please consult your local power company for advice.

WARNING

This product must be connected to a protective earth circuit. This product is supplied with a plug that has a protective earth pin. This plug will fit only into an earthed electrical outlet. This is a safety feature. Always connect equipment to a properly grounded electrical outlet. If in doubt, have the outlet checked by a qualified electrician.

To disconnect all electrical power to the product, the disconnect device is the power cord. Remove the plug from the electrical outlet.

Ventilation

Slots and opening in the enclosure of the product are provided for ventilation. Do not block or cover the ventilation vents, as this could result in the product overheating.

This product should not be placed in a built-in installation unless proper ventilation is provided, please contact your Xerox representative for advice.

Never push objects of any kind into the ventilation vents of the product.

Operator accessible areas

This product has been designed to restrict operator access to safe areas only. Operator access to hazardous areas is restricted with covers or guards, which would require a tool to remove. Never remove these covers or guards.

viii	Tape Client Job Submission Guide

Image 8

Contents Tape client USA Table of contents Managing and printing jobs from the Tape Client Managing the Tape ClientSafety Laser safetyOperation safety U. S Ozone information U. S. onlyOperation safety Europe Ventilation Operator accessible areasElectrical supply CE mark Europe only MaintenanceBefore cleaning your product Radio and telecommunications equipment directive Europe only For further information Safety Xii Tape Client Job Submission Guide About this guide ContentsIntroduction Conventions Documentation DocuPrint 2000 Series 100/115/135/155/180 EPS documentationPrinting customer documentation Cd /usr/ucbFeatures and capabilities Tape Client overviewTape Client capabilities IBM DOS/360 Power II HOST=POWER Supported tape formatsJob and tape status reporting Functional overviewStreaming and spooling transmission modes Tape job accounting Tape dumpJob recovery Input processing from tape using Print Description Language Host computer tape formatsTape codes Record formatsFormat Record structureOffline dump Managing and printing jobs from the Tape Client Overview of the printing processTape Client window End of Job field on Tape Client window Preparing to print a tape job Importing resource filesLcds Resources window with Source menu displayed Lcds Resources window displaying resource files on tape Popup menu with Import selected Specifying files for printingSpecifying the JDL, JDE, and form to start a job Document field on Tape Client window Job Descriptor Library window Moving over files on a tape Controlling input for tape jobsEnding a job Move Tape Mark window Moving over blocks on a tape 10. Move Block windowStarting and ending tape dump sessions Managing the Tape Client Accessing the Tape ClientSetting up the printer for offline printing Printer setup window Adding a printerModifying a printer Deleting a printerManaging the tape drive Rename Device windowManaging the tape job accounting log Click Rewind or UnloadViewing the job log Printing the job log Click Print LogPage Managing the Tape Client Tape Client Job Submission Guide Index JDLINDEX-2