Xerox 701P21110 manual Moving over blocks on a tape, Move Block window

Page 37

Managing and printing jobs from the Tape Client

Moving over blocks on a tape

You can position a job tape forward or backward to skip one or more of the blocks within a file on the tape.

You must initiate the Move command before you start the job; you cannot move over blocks while the job is printing. If a job is currently printing, stop input by clicking End on the Tape Client window, and confirm your action on the confirmation window.

1.In the Move field on the Tape Client window, click Block....

The Move Block window opens.

Figure 2-10. Move Block window

2.On the Move Block window, enter the number of blocks that you want to skip; or click the arrow buttons until the number that you want is displayed.

3.Select the direction in which you want to move the tape: RWD (rewind, or backward) or FWD (forward).

4.Click Move. The Move Block window closes, and the tape advances or rewinds past the number of blocks that you indicated.

Tape Client Job Submission Guide

2-13

Image 37

Contents Tape client USA Table of contents Managing the Tape Client Managing and printing jobs from the Tape ClientLaser safety SafetyOzone information U. S. only Operation safety U. SOperation safety Europe Electrical supply Operator accessible areasVentilation Before cleaning your product MaintenanceCE mark Europe only Radio and telecommunications equipment directive Europe only For further information Safety Xii Tape Client Job Submission Guide Introduction ContentsAbout this guide Conventions DocuPrint 2000 Series 100/115/135/155/180 EPS documentation DocumentationCd /usr/ucb Printing customer documentationTape Client overview Features and capabilitiesTape Client capabilities Supported tape formats IBM DOS/360 Power II HOST=POWERStreaming and spooling transmission modes Functional overviewJob and tape status reporting Tape dump Tape job accountingJob recovery Host computer tape formats Input processing from tape using Print Description LanguageTape codes Record formatsOffline dump Record structureFormat Overview of the printing process Managing and printing jobs from the Tape ClientTape Client window End of Job field on Tape Client window Importing resource files Preparing to print a tape jobLcds Resources window with Source menu displayed Lcds Resources window displaying resource files on tape Specifying files for printing Popup menu with Import selectedSpecifying the JDL, JDE, and form to start a job Document field on Tape Client window Job Descriptor Library window Ending a job Controlling input for tape jobsMoving over files on a tape Move Tape Mark window 10. Move Block window Moving over blocks on a tapeStarting and ending tape dump sessions Setting up the printer for offline printing Accessing the Tape ClientManaging the Tape Client Adding a printer Printer setup windowDeleting a printer Modifying a printerRename Device window Managing the tape driveClick Rewind or Unload Managing the tape job accounting logClick Print Log Viewing the job log Printing the job logPage Managing the Tape Client Tape Client Job Submission Guide JDL IndexINDEX-2