Xerox 701P21110 manual Managing the tape drive, Rename Device window

Page 42

Managing the Tape Client

Managing the tape drive

In the Input Device group box on the Tape Client window, you can initiate the following tasks to manage the tape drive from which you are sending jobs.

Renaming a tape If you have more than one tape drive connected to your printer, drive you must select the drive that you want to use to send the job.

When the printing system is installed and your tape drives are configured on it, the system names them “Tape 0,” “Tape 1,” etc. If you want to assign a different name to a tape drive, follow these steps:

1.On the Tape Client window, select the drive that you want to rename from the Device menu.

2.Click Rename.... The Rename Device window opens, displaying in the Old Name field the name of the drive that you selected.

Figure 3-3. Rename Device window

3.In the New Name text field, enter the name you want to give the tape drive.

4.Click OK. The Rename Device window closes, and the new drive name is displayed on the Device menu.

NOTE: The renaming of the tape drive applies to the Tape Client window, not to the DocuSP window.

3-4	Tape Client Job Submission Guide

Image 42

Contents Tape client USA Table of contents Managing and printing jobs from the Tape Client Managing the Tape ClientSafety Laser safetyOperation safety U. S Ozone information U. S. onlyOperation safety Europe Operator accessible areas Electrical supplyVentilation Maintenance Before cleaning your productCE mark Europe only Radio and telecommunications equipment directive Europe only For further information Safety Xii Tape Client Job Submission Guide Contents IntroductionAbout this guide Conventions Documentation DocuPrint 2000 Series 100/115/135/155/180 EPS documentationPrinting customer documentation Cd /usr/ucbFeatures and capabilities Tape Client overviewTape Client capabilities IBM DOS/360 Power II HOST=POWER Supported tape formatsFunctional overview Streaming and spooling transmission modesJob and tape status reporting Tape job accounting Tape dumpJob recovery Tape codes Input processing from tape using Print Description LanguageHost computer tape formats Record formatsRecord structure Offline dumpFormat Managing and printing jobs from the Tape Client Overview of the printing processTape Client window End of Job field on Tape Client window Preparing to print a tape job Importing resource filesLcds Resources window with Source menu displayed Lcds Resources window displaying resource files on tape Popup menu with Import selected Specifying files for printingSpecifying the JDL, JDE, and form to start a job Document field on Tape Client window Job Descriptor Library window Controlling input for tape jobs Ending a jobMoving over files on a tape Move Tape Mark window Moving over blocks on a tape 10. Move Block windowStarting and ending tape dump sessions Accessing the Tape Client Setting up the printer for offline printingManaging the Tape Client Printer setup window Adding a printerModifying a printer Deleting a printerManaging the tape drive Rename Device windowManaging the tape job accounting log Click Rewind or UnloadViewing the job log Printing the job log Click Print LogPage Managing the Tape Client Tape Client Job Submission Guide Index JDLINDEX-2