SETTING THE SYSTEM CONFIGURATION
Diagnostics menu tasks
The following procedures can be accessed from the Diagnostics pull- down menu.
•
•
•
•
•
•
•
Printing samples
Capturing a trace
Executing a captured trace
Printing a trace file
Setting the debug level
Updating the software using a diskette or a CD
Updating the software remotely.
Printing samples
This section describes the procedure for setting up and printing sample files (test patterns).
To set up and print sample files:
1.From the Diagnostics menu, select Sample Prints. The Sample Prints window displays.
Figure 4-9. Sample Prints window
2.Specify the test pattern and the criteria you want to use to print the sample file.
XEROX DOCUPRINT 92C IPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM |