SETTING THE SYSTEM CONFIGURATION
•
•
Note: This list contains only standard stock sizes. You cannot create or specify paper sizes not contained in this list.
If you have a job that requires a size of paper that is not on this size list, add it using the Tools icon on the printer control console. (Refer to the “Printers” chapter in the Xerox DocuPrint 92C IPS System Overview Guide.) However, the size must be within the length/width range supported by your IPS printer. (Refer to the “Paper and other print media” chapter in the Xerox DocuPrint 92C IPS System Overview Guide.) 
Plex Capability — Specifies whether the media will be simplex or duplex, or simplex only.
Form Type — Lists the types of stock you will use in your IPS printer (e.g., standard,
You can create new stock types to add to this list by following these steps:
a.Click the Add button, located below the Form Type list box. The following window displays:
Figure 4-27. Add a New Form Type window
b.With the cursor positioned on the Add a New Form Type window, enter the name of the media type you want to add to the list (such as
c.Click Add on the Add a New Form Type window. Your new stock type displays on the Form Type list.
To create a temporary form type: You may have occasion to create a media icon requiring a form type you know you will not need again for any other stock. You do not want to add this form type to the list of those you use frequently. For this, you can create a temporary form type that will be available only while you are creating your media icon.
a.On the Other Form Type line, located below the Add and Delete buttons, click the left mouse button.
b.Enter a name for the new form type. The text you enter displays in the media icon display box at the bottom of the screen as well as on the Other Form Type line. Do not click the Add button.
XEROX DOCUPRINT 92C IPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM |