Xerox 128 manual ProblemSolving

ProblemSolving

3.For the processor feeder trays, press the green lever to unlatch the paper feeder assembly.

Figure 4-21

4.Remove and discard any partially fed paper. Ensure that:

•The paper supply is neatly stacked.

•The stack is not higher than the MAX line on the length guide.

•The length guide is firmly touching the back edge of the stack.

•For the high capacity feeder trays, also ensure the side guide is firmly touching the side of the stack.

NOTE: You do not need to discard transparencies and other stiff materials unless they are damaged.

5.For the processor feeder trays, relatch the paper feeder assembly by pressing the green dot until the assembly clicks into place.

DocuTech 128/155/180 HighLight Color Operator Guide 4- 21