Xerox 128 manual Paper weights, Special stocks, Stock specifications

Page 22

System components

Stock specifications

The success of any print run depends on proper selection, care, and handling of the paper or other stock that is used. It is very important to select, store, condition, and load print media properly in order to keep your printer running at optimum efficiency.

The printer functions best and produces the best print quality when using stocks that have the correct:

•Size

•Weight

•Type

•Color

For more comprehensive information on paper stocks for Xerox printers, refer to Helpful facts about paper, 721P82493.

Paper weights

The DT 128/155/180 HLC supports the following range of paper weights:16–110 pound / 60–200 gsm

Other paper weights should not be used.

The equivalent grams per square meter of 20 pound paper is actually 75 gsm. However, there is no standard 75 gsm paper. The available stock that is closest in weight to 20 pound paper is 80 gsm.

Special stocks

The following special stocks can be used with the DocuTech 128/ 155/180 HLC:

•Labels: Must be the type designed for high-speed printers and must meet the specifications described in the section above. Loading instructions are printed on all paper trays.

•Transparencies: Must be the type designed for high-speed printers and must meet the specifications described in the section above. Loading instructions are printed on all paper trays.

•Colored paper: Available in a variety of colors, colored paper has many uses, including calling attention to certain printed material, separating special sections, or dividing chapters of a report.

•Preprinted paper: May be letterhead, forms, or logos. (Refer to the “Helpful Facts about Paper” guide to verify that the preprinting inks used on your stock are the kind formulated for use in laser printers.)

2-4	DocuTech 128/155/180 HighLight Color Operator Guide

Image 22

Contents Operator USA Domestic/Household Environment Product Recycling and DisposalEuropean Union Professional/Business EnvironmentDocuTech 128/155/180 HighLight Color Operator Guide Table of Contents Problem Solving Technical informationService and supplies DocuTech 128/155/180 HighLight Color Operator Guide Introduction Conventions System safety Laser safetyOzone safety Operation safetyEuropean Union declaration of conformity Safety notices Electricity at Work Regulation UK RegulationCheck your understanding Equipment in my premises Would like to carry out my own safety tests on the XeroxAdditional queries Require records of all testsSafety notices Electronic reprographics process DocuSP controller DocuTech PrinterFunctional overview Optional ComponentsData stream resolution Data formats supportedStock specifications Paper weightsSpecial stocks General paper characteristics Graphical user interface overviewInput queue System software and job flowJob DecomposerOutput queue Printer overviewPrinter High volume printer Feeder/paper tray High volume printerReady to Open IndicatorTrays 3, 4, 5, and 6 high-capacity trays 2600 sheets each Please WaitSample tray Purge trayInverter feeder/stacker On stackersFeeder/stacker modules More High volume printer configurations Production publisher Convenience trayInterposer Interposer production publisher onlyBindexer FinisherStitcher Top tray StackerBinder Bypass transportBypass transport on the production publisher Bypass transport on the High volume printerBy 10 inch enablement kit Paper pathsHigh volume printer paper path 11. Route of paper through the high volume printerSystem components Production publisher paper path Bypass transport paper pathHigh volume printer bypass transport paper path DocuSP controller SystemSystem Hardware Controller overviewTape drives overview Accessing DocuSP remotely Remote WorkflowMoving the controller Do notPeripheral cabinet 9-track and 18/36-track tape drives 14 -track cartridge tape drivePaper sizing and print speed 15. Peripheral cabinetSystem components System components Cleaning and maintenance overview Necessary PrecautionsFinisher precaution Routine maintenancePaper Storing paperRecommended temperature and humidity for Paper storage Conditioning paperPaper curl Paper conditioningAdding paper to tray 1 or Preparing the paper trayUsing the custom transfer assist blade Positioning the stackPaper Size Set Paper Size Adjusting for paper curl Measuring the paper curlMove green Decurler lever Adjusting the decurler lever Locating the decurler leverReplacing the black dry ink bottle Maintaining the printerReplace the black dry ink bottle Removing the empty bottle Replacing the highlight color container 10 Removing the paper seal11 Highlight color container Removing the CCU using the CCU cart Changing the highlight color Customer Changeable Units12 Leveling the cart 13 Unlatching the CCU Inserting a CCU 15 Closing the top cover17 Turning the backup roller handle Counterclockwise Removing the CCU using the service stand Storing the cart and CCU19 Unlatching the CCU Adding fuser shield 20 Removing the CCU from the printer21 Opening the fuser drawer 22 Preparing to add fuser blend 23 Adding the fuser blend Waste containers Replacing the 128/155/180 HLC developer waste containerReplacing the 128/155/180 toner waste bottle 26 Opening the HLC module door27 Flat cap on waste bottle Wire Module Removal and Replacement 29 Wire module retainer springsRoutinemaintenance Cleaning the system and its components Cleaning the 18/36-track cartridge tape driveCleaning the DVD drive Cleaning the 26-track cartridge tape driveCleaning the diskette drive Cleaning the sensors and the reflecting surfaces Cleaning the Q850 and Q861 sensor30 Area 4 and green handle Cleaning the Q1011/1009 sensor and mirror Cleaning the Q1106 and Q1166 sensorsCleaning the Q1107 sensor 33 Q1106 and Q1166 sensorsCleaning the Q1164 sensor 34 Q1107 sensorCleaning the display Cleaning the exterior surfaces of the systemClearing or cleaning the finisher sensors Clearing the Q1201 sensorClearing the Q1202 and Q1203 sensors 37 Locating the Q1201 sensor38 Locating the Q1202 and Q1203 sensors Cleaning the Q1222 and Q1210 sensors 40 Locating the Q1222 and Q1210 sensorsClearing the Q1205, Q1206, and Q1207 sensors 41 Locating the Q1222 and Q1210 sensorsClearing the Q1213 sensor 42 Locating the Q1205, Q1206, and Q1207 sensorsClearing the Q1221, Q1218, and Q1227 sensors 43 Q1213 sensorCleaning the binder 44 Locating the Q1221, Q1218, and Q1227 sensors45 Opening the binder drawer Cleaning the binder tape guides Cleaning the binder platenCleaning the flappers 48 Cleaning the binder platenCleaning the calipers 49 Cleaning the flappersClosing the binder Replacing the stitcher spool a51 Releasing the stitcher head 52 Removing the stitcher wire plug 53 Removing the wire from the tubing 55 The measuring bracket 57 Replacing the pin 58 Removing the paper wrapper Storing the binder tape reels 60 Storing binder tape in a cool, dry place Replacing the binder tape reel 62 Opening the binder drawer63 Removing the tape 65 Locking the reel 67 Threading the tape to the pressure roll Adjusting the binder tape registration 69 Cutting the tape70 Locating the binder tape knob 71 Adjusting the tape position up Routine maintenance How problems are displayed Printer faults and fault windowsWhen a fault occurs Resolving a processor problemResolving a processor problem ProblemSolving Sheets from the fuser ProblemSolving Clearing paper jams Solving print quality problemsChecking job integrity following a paper jam Area Area Area Area Using the pinch lever to access area 10 Area 11 all feeder/stackers 11 Area 12 all feeder/stackers Clearing paper jams in the Feeder/Stackers 12 Area14 Area 15 Area 16 Area Clearing a paper jam in the bypass transport 17 Area18 Area Clearing a misfeed feeder tray fault 19 AreaProblemSolving Incorrect paper size message Finisher problems Interposer problemsResolving a finisher problem Resolving a finisher problem Binder tape fault Stitcher spool a fault 23 Stitcher head release handle24 Removing the stitcher wire plug 25 Cutting the wire 27 Removing the wire fragments Customer Support Center Checking paper curl29 Location of printing system serial number Problem Solving Paper tray capacities DocuTech printer specificationsPrinter rates All traysTechnical information Top tray Additional paper capacitiesInverter StackerImproving the feeding reliability Printer satisfaction guidesStock storage Stitches per spoolStock satisfaction guides Satisfaction guide for paper trays 1Satisfaction guide for paper trays 3, 4, 5, Using various stocks Satisfaction guide for 2-sided printingSatisfaction guide for various stocks Stock Type Instructions for useTechnicalinformation Using non-standard stock Stock width impact on system performanceBackground Paper stock rotationStock length impact on system performance Limitations Common US paper sizesOther paper sizes that can be rotated Finisher satisfaction guides 10. Stacker capacity11. Stitcher satisfaction guide 11. Stitcher satisfaction guide 12. Binder satisfaction guide13. Top tray satisfaction guide 13. Top tray satisfaction guide Xerox support services Customer supportSupplies service Operator trainingService and supplies Meter reading and reporting Routine maintenanceConsumable supplies table Consumable supplies Labels TransparenciesGummed Black Stitcher Wire CleaningWire Modules Royal BlueSupplies checklist Description Quantity Date of order Ordered

Related manuals

Manual 12 pages 5.45 Kb