Getting Started
Guide to This Machine
1Control Panel
1.Shows errors and machine status. m: Data In indicator
The Data In indicator shows the status of data reception from a computer.
•This indicator blinks when data is be- ing received.
•This indicator goes on when there is data remaining to be printed.
L: Service call indicator
x: Misfeed indicator
M: Cover indicator
d: Staple indicator
D: Toner indicator
2.{User Tools/Counter} key
•User Tools
Press to change the default settings and conditions to meet your require- ments.
•Counter
Press to display or print the total num- ber of copies made.
•Inquiry
Press to check where to contact to have the machine repaired or to order toner.
ZGXS301N
3.{Job List} key
Shows the job list. See “Job List”, General Settings Guide.
4.Display panel
Shows operation status, error messages, and function menus. ⇒ p.9 “Display Pan- el”
5.{Energy Saver} key
Press to switch to and from the Energy Saver mode. See “ENERGY STAR Pro- gram”, General Settings Guide .
Note
❒This key is ineffective during system setting (User Tools) operations.
6.Main power indicator
This indicator goes on when the main power switch is turned on.
Important
❒Do not turn off the main power while the On indicator is blinking. Doing so may damage the hard disk.
7.On indicator
This indicator goes on when the opera- tion switch is turned on.
8