Xerox 1075 manual Connecting the Machine to the Host Using the USB Cable

Page 19

Connecting the Machine

B Plug the 36-pin end of the parallel cable into the parallel port at the right side of the back cover of the machine.

1

ZGWH050E

C Squeeze the wire clips on each side of the connector together until they snap into place. The clips hold the cable securely in place.

D Plug the other end of the parallel cable into the computer's parallel port.

Connecting the Machine to the Host Using the USB Cable

You can connect the machine to the host computer using a USB interface cable when the optional USB2.0 Interface Board is installed in the machine.

This machine does not come with a USB interface cable. Make sure to purchase the appropriate cable for the machine and your computer.

Follow the procedures below to connect the machine to the host computer using a USB interface cable.

A Connect the USB2.0 interface cable to the USB2.0 port at the right side of the back cover of the machine.

ZGUH493E

B Connect the other end to the USB port on the host computer.

Note

❒The optional USB2.0 Interface Board is supported by Windows 98SE/Me, Windows 2000/XP, Mac OS 9.x and Mac OS X Classic mode.

•For Windows 98SE/Me:

Make sure to install “USB Printing Support”. When USB2.0 is used with Windows 98SE/Me, only a speed equal to that of USB1.1 is possible.

• Macintosh supports only the standard USB port.	13

Image 19

Contents Printer Kit Type UE USA G339-8607 Introduction Page Table of Contents Page Manuals for This Machine Limitation How to Read This ManualSymbols PreparationUse the Network Utilities included at your own convenience Features of This MachineUsing the Document Server Network ConnectivityPCL printer drivers Printer Drivers for This MachineAdobe PostScript 3 Printer Drivers and PPD files Rpcs printer driverAgfa Monotype Font Manager SmartNetMonitor for AdminSoftware and Utilities Included on the CD SmartNetMonitor for ClientAcrobat Reader Printer Utility for Mac USB Printing SupportJob List key Guide to This MachineControl Panel User Tools/Counter keyClear/Stop key Display Panel10. # key Key explanations Displays and Key OperationsInitial print display Common Key OperationOffline key OnlineOffline Online keyRequirements Connecting the MachineConnecting the Machine to the Host Using the Parallel Cable Turn off the main power switchConnect the other end to the USB port on the host computer Connecting the Machine to the Host Using the USB CableSetting Paper on the Bypass Tray Open the bypass tray Adjust the paper guides to the paper sizeExtender Paper guides Press Printer Features Setting the Paper Size on the Display PanelPress Bypass Paper Size Press Bypass Paper Size Press Custom Size Setting custom size paperPress OK Press the User Tools/Counter keyPress Paper Type Bypass tray Setting thick paper or OHP transparenciesPress System Settings Press the Tray Paper Settings tab Press TNext to scroll the listPress the User Tools/Counter key.1 Select OHP or Thick PaperGetting Started Installing using Auto Run Installation MethodInstalling manually User Codes Quick Install Click Install Click Quick InstallFollow the instructions on the screen Windows XP Home Edition Windows 95/98/Me, Windows 2000, Windows NTLect Rename Windows XP ProfessionalWindows 2000/XP Installing the PCL 6/5e and Rpcs Printer DriverInstalling the PCL 6/5e and Rpcs Printer Driver Windows 95/98/MeClick PCL/RPCS Printer Drivers Windows NTPCL 6/5e Printer Driver Setting Up OptionsStart on the taskbar Printers window appearsClick Next Check Local Printer, and then click Next Installing the PostScript 3 Printer DriverWindows 95/98/Me Installing the PostScript 3 Printer Driver Installing the printer driverSetting up options Click Next Windows 2000/XP Installing the PostScript 3 Printer DriverPrinters window appears Click the Device Settings tab Windows NT 4.0 Installing the PostScript 3 Printer DriverClose all applications that are running Select PostScript 3 Printer Driver Add Printer Wizard starts Bidirectional transmission When connecting with a parallel cableWhen connecting with Ieee When connecting with the networkWhen connecting with USB2.0 PostScript 3 printer driver installer window appears Close the Chooser dialog box Setting Up the PPD FileClick Configure Click OKInstalling screen fonts Installing Adobe Type Manager ATMRun Print Center Mac OS X Installing the PostScript 3 Printer DriverClick Add Printer Click Finish Installing the Printer Driver Using USBWindows 98SE/Me Installing the Printer Driver Using USB Check Specify a location, and then click BrowsePostScript Windows 2000/XP Installing the Printer Driver Using USBExit the Desktop Printer Utility Macintosh Creating a Desktop Printer IconClick Change in USB Printer Selection Enter the machine name, and then click SavePrinting with Scsi Print Installing the Printer Driver Using IeeeNew Hardware Found or Device Driver Wizard dialog box Click Open Click OK Found New Hardware Wizard dialog box appearsSelect Optional search locations, and then click Next Click BrowseWindows XP Printing with IP overNext Windows MeWindows Click SmartNetMonitor for Client/Admin Installing the SmartNetMonitor for Client/AdminSelect Agfa Monotype Font Manager Installing the Agfa Monotype Font ManagerFor PageMaker 7.0 default installation Using Adobe PageMaker Version 6.0, 6.5 orIndex Quick Install Memo Memo UE USA G339