Xerox 1075 manual Installing the Printer Driver Using Ieee, Printing with Scsi Print

Page 52

Installing the Printer Driver and Software

Installing the Printer Driver Using IEEE 1394

This section gives basic instructions for installing printer drivers using IEEE 1394. SCSI Print and IP over 1394 are available when printing via IEEE 1394. The printer drivers can be installed from the CD-ROM that comes with this machine.

2	Preparation
	Be sure that all other applications are closed and the computer is not printing

before installation.

Important

❒Do not connect new IEEE 1394 devices to the machine or turn on the machine while installing the printer driver.

❒Before uninstalling the printer driver, be sure to disconnect the IEEE 1394 in- terface cable from the computer.

❒The optional IEEE 1394 Interface Board is not supported by Windows 95/98 or Windows NT 4.0. If the “plug and play” function starts, click [Cancel] in the

[New Hardware Found] or [Device Driver Wizard] dialog box.

Printing with SCSI Print

Printing using a SCSI print device with the optional 1394 Interface Unit is possi- ble under Windows 2000 or Windows XP.

Preparation

“SCSI print” must be enabled and “IP over 1394” must be disabled from the machine's display panel. For more information about how to make machine settings, see “Interface Settings/IEEE 1394 (Option)”, General Settings Guide.

Note

❒If [Found New Hardware Wizard] appears every time the computer is started or the cable is connected with Windows 2000 or Windows XP when the print function that uses SCSI print is not installed, disable the device. See p.49 “Dis- abling the Device” for more information.

Installing the Printer Driver

Note

❒If you send data from your computer when data is being received from an- other client computer, your data will be printed after completing the print job from the other client computer.

❒When the machine is connected to the computer properly via the 1394 Inter- face, the appearance of the icon in the printer window changes.

46

Image 52

Contents Printer Kit Type UE USA G339-8607 Introduction Page Table of Contents Page Manuals for This Machine How to Read This Manual SymbolsPreparation LimitationFeatures of This Machine Using the Document ServerNetwork Connectivity Use the Network Utilities included at your own conveniencePrinter Drivers for This Machine PCL printer driversRpcs printer driver Adobe PostScript 3 Printer Drivers and PPD filesSmartNetMonitor for Admin Software and Utilities Included on the CDSmartNetMonitor for Client Agfa Monotype Font ManagerUSB Printing Support Acrobat Reader Printer Utility for MacGuide to This Machine Control PanelUser Tools/Counter key Job List keyClear/Stop key Display Panel10. # key Displays and Key Operations Initial print displayCommon Key Operation Key explanationsOnline OfflineOnline key Offline keyConnecting the Machine Connecting the Machine to the Host Using the Parallel CableTurn off the main power switch RequirementsConnecting the Machine to the Host Using the USB Cable Connect the other end to the USB port on the host computerSetting Paper on the Bypass Tray Open the bypass tray Adjust the paper guides to the paper sizeExtender Paper guides Press Printer Features Setting the Paper Size on the Display PanelPress Bypass Paper Size Setting custom size paper Press OKPress the User Tools/Counter key Press Bypass Paper Size Press Custom SizeSetting thick paper or OHP transparencies Press System Settings Press the Tray Paper Settings tabPress TNext to scroll the list Press Paper Type Bypass traySelect OHP or Thick Paper Press the User Tools/Counter key.1Getting Started Installation Method Installing using Auto RunInstalling manually User Codes Quick Install Click Install Click Quick InstallFollow the instructions on the screen Windows 95/98/Me, Windows 2000, Windows NT Lect RenameWindows XP Professional Windows XP Home EditionInstalling the PCL 6/5e and Rpcs Printer Driver Installing the PCL 6/5e and Rpcs Printer DriverWindows 95/98/Me Windows 2000/XPWindows NT Click PCL/RPCS Printer DriversSetting Up Options PCL 6/5e Printer DriverPrinters window appears Start on the taskbarInstalling the PostScript 3 Printer Driver Windows 95/98/Me Installing the PostScript 3 Printer DriverInstalling the printer driver Click Next Check Local Printer, and then click NextSetting up options Windows 2000/XP Installing the PostScript 3 Printer Driver Click NextPrinters window appears Click the Device Settings tab Windows NT 4.0 Installing the PostScript 3 Printer DriverClose all applications that are running Select PostScript 3 Printer Driver Add Printer Wizard starts When connecting with a parallel cable Bidirectional transmissionWhen connecting with Ieee When connecting with the networkWhen connecting with USB2.0 PostScript 3 printer driver installer window appears Setting Up the PPD File Click ConfigureClick OK Close the Chooser dialog boxInstalling Adobe Type Manager ATM Installing screen fontsRun Print Center Mac OS X Installing the PostScript 3 Printer DriverClick Add Printer Installing the Printer Driver Using USB Windows 98SE/Me Installing the Printer Driver Using USBCheck Specify a location, and then click Browse Click FinishWindows 2000/XP Installing the Printer Driver Using USB PostScriptMacintosh Creating a Desktop Printer Icon Click Change in USB Printer SelectionEnter the machine name, and then click Save Exit the Desktop Printer UtilityPrinting with Scsi Print Installing the Printer Driver Using IeeeNew Hardware Found or Device Driver Wizard dialog box Found New Hardware Wizard dialog box appears Select Optional search locations, and then click NextClick Browse Click Open Click OKPrinting with IP over Windows XPWindows Me NextWindows Installing the SmartNetMonitor for Client/Admin Click SmartNetMonitor for Client/AdminInstalling the Agfa Monotype Font Manager Select Agfa Monotype Font ManagerUsing Adobe PageMaker Version 6.0, 6.5 or For PageMaker 7.0 default installationIndex Quick Install Memo Memo UE USA G339