Xerox 1075 manual When connecting with the network, When connecting with Ieee

Installing the Printer Driver and Software

❖ When connecting with the network

	• The machine must be set to bidirectional transmission.
	• SmartNetMonitor for Client included on the CD-ROM must be installed.
	One of the following conditions must also be satisfied besides the two re-
	quirements mentioned above.
	• The port for SmartNetMonitor for Client and the TCP/IP protocol must be
	used.
2
	• The standard TCP/IP port is used without changing the port name (Win-

dows 2000/XP).

• The IP address specified in the Microsoft TCP/IP Print is used (Windows NT 4.0).

• The IP address is included in port name when using IPP protocol.

Note

❒In Windows 95/98/Me, [Enable bi-directional support for this printer] must be selected in [Spool Settings] on the [Details] tab in RPCS™ printer driver.

❒In Windows 2000/XP, or Windows NT 4.0, [Enable bidirectional support] must be selected, and [Enable printer pooling] must not be selected on the [Port] tab in RPCS™ printer driver.

❖When connecting with IEEE 1394

• The port on the optional IEEE 1394 Interface Board and the IEEE 1394 port on the computer are connected using an interface cable (Windows Me, Windows 2000/XP).

Note

❒[SCSI print (SBP-2)]must be set to “Active” and [Bidirectional SCSI print] must be set to “On” in [IEEE 1394] on the [Interface Settings] tab in the machine's System Settings.

❒In Windows Me, [Enable bi-directional support for this printer] must be selected in [Spool Settings] on the [Details] tab in RPCS™ printer driver.

❒In Windows 2000/XP, or Windows must be selected, and [Enable printer [Port] tab in RPCS™ printer driver.

NT 4.0, [Enable bidirectional support] pooling] must not be selected on the

❖When connecting with USB2.0

•The port on the optional USB2.0 Interface Board and the USB port on the computer are connected using a USB interface cable (Windows 98SE/Me, Windows 2000/XP).

Note

❒In Windows 98SE/Me, [Enable bi-directional support for this printer] must be selected in [Spool Settings] on the [Details] tab in RPCS™ printer driver.

❒In Windows 2000/XP, [Enable bidirectional support] must be selected, and [Enable printer pooling] must not be selected on the [Port] tab in RPCS™ printer driver.

38