Xerox 1075 Open the bypass tray, Adjust the paper guides to the paper size, Extender Paper guides

Setting Paper on the Bypass Tray

A Open the bypass tray.

1

ZGUH030E

B Adjust the paper guides to the paper size.

Important

❒If the paper guides are not flush against the paper, skewed images or paper misfeeds might occur.

C Gently insert the paper face up in the bypass tray until the beeper sounds.

2	1
	ZGWH071E
1. Extender

2. Paper guides

Note

❒ Be sure to set paper in L orientation as shown in the illustration above.

❒ The beeper will not sound if it is turned off. Gently insert the paper until it stops.

❒ Do not stack paper over the limit mark, otherwise a skewed image or paper misfeeds might occur.

❒ Open out the extender to support paper sizes larger than A4 L, 81/2"×11" L . ❒ Fan the paper to get air between the sheets to avoid a multi-sheet feed.

❒ When setting an OHP transparency, make sure that its front and back sides are properly positioned.

❒ Select the paper type when printing on OHP transparencies or thick paper (over 105g/m2). For details, see p.18 “Setting thick paper or OHP transpar- encies”.

15