Using Reduction/Enlargement
Typical Application
Use the automatic Reduction/Enlargement features to adjust the size of the output image.
Procedure
| 1. | Load your originals. |
| 2. | Make your programming selections by touching the |
|
| screen. The most common selections are on the Basic |
|
| Copying tab (Output, |
|
| Enlargement, and Paper Supply). |
| 3. | Use the keypad to enter the number of copy sets. |
| 4. | In the Basic Copying tab under Reduce/Enlarge, select an |
|
| existing preset or press the More...button. Select from the |
|
| additional presets or enter your desired Reduction/ |
|
| Enlargement percentage and press the Save button. |
| 5. | Press the Start ( ) button. |
HINT |
| |
Custom Auto% will fill the copy page by stretching the image | ||
| to the edges of the copy page. | |
| Normal Auto% will proportionally enlarge the image until it | |
| fills the copy page. | |
TIP |
| |
| ||
When using the Document Glass, you can enlarge an image | ||
| up to 400%. Using the Document Feeder you can enlarge up | |
| to 300%. | |
|
|
|
Page 52 | Xerox WorkCentre Pro/CopyCentre User Guide |