NOTE | If you have recently created a new template or modified an |
| existing one using CentreWare® Network Scanning services |
| tools, you must update the template list at the machine so it |
| reflects the latest information. |
|
|
| Press the More Scan Features tab then the Update Template |
| List button. Press the Update Template List button then the |
| Confirm button. |
| This may take a few minutes depending upon the number of |
| templates available. |
| 3. Select the desired template in the Template Name List. If |
| the desired template does not exist, refer to the |
| CentreWare® Network Scanning Services guide for |
| information on creating a template. |
| You can modify your template by pressing the Sides |
| Scanned button to select 1 sided, 2 sided, or 2 sided, |
| Rotate Side 2. |
| 4. Press the Image Quality button that corresponds to the |
| correct image orientation of your originals then press the |
| Save button. |
| 5. Press the Start ( ) button. |
|
|
| Scan to Desktop only: |
|
|
| 6. If enabled, you will receive a message at your workstation |
| indicating a scanned document is in your folder. |
| 7. Use the PaperPortTM software included with the system to |
| edit, or process scanned images. |
Page 74 | Xerox WorkCentre Pro/CopyCentre User Guide |