SAFETY SUMMARY (continued)
GENERAL: Any LEDs used in this product are Class 1 LEDs as per IEC
ENVIRONMENTAL CONDITIONS:
This instrument is intended for indoor use in an installation category II, pollution degree 2 environment. It is designed to operate at a maximum relative humidity of 95% and at altitudes of up to 2000 meters. Refer to the specifications tables for the ac mains voltage requirements and ambient operating temperature range.
Symbol
| SAFETY SYMBOL DEFINITIONS | ||
Description |
| Symbol | Description |
Direct current |
|
| Terminal for Line conductor on permanently |
|
|
| installed equipment |
Alternating current
Both direct and alternating current
Earth (ground) terminal
Protective earth (ground) terminal
Frame or chassis terminal
Terminal for Neutral conductor on permanently installed equipment
Caution, risk of electric shock
Caution, hot surface
Caution (refer to accompanying documents)
In position of a
Out position of a
On (supply)
Off (supply)
Terminal is at earth potential (Used for measurement and control circuits designed to be operated with one terminal at earth potential.)
Standby (supply) - Units with this symbol are not completely disconnected from ac mains when this switch is off. To completely disconnect the unit from ac mains, either disconnect the power cord or have a qualified electrician install an external switch.
Herstellerbescheinigung
Diese Information steht im Zusammenhang mit den Anforderungen der
Maschinenläminformationsverordnung vom 18 Januar 1991.
* Schalldruckpegel Lp <70 dB(A) * Am Arbeitsplatz * Normaler Betrieb * Nach EN 27779 (Typprüfung).
Manufacturer’s Declaration
This statement is provided to comply with the requirements of the German Sound Emission Directive, from 18 January 1991.
* Sound Pressure Lp <70 dB(A) * At Operator Position * Normal Operation * According to EN 27779 (Type Test).
4