Agilent Technologies 3138A-00101 and above, 66000A manual Installation, Items Supplied, Input Power

Page 12

2

Installation

Installation

When you receive your mainframe, first look for any obvious damage that could have occurred during shipment. If there is damage, notify the carrier and the nearest Agilent Sales Office immediately. Warranty information is printed behind the cover page of this manual.

Save the shipping carton and packing materials in case the mainframe has to be returned to Agilent Technologies in the future. If you return the mainframe for service, attach a tag identifying the owner and model number. Also include a brief description of the problem.

Items Supplied

In addition to this manual, check that the following items are included with the mainframe:

Power Cord Your mainframe was shipped with a power cord for the type of outlet used at your location. Depending on the option that was ordered, some power cords are shipped without a plug. If the appropriate cord was not included, refer to the option list in Chapter 1 and contact your nearest Agilent Sales and Service Office to obtain the correct cord.

Your mainframe cannot use a standard power cord. The power cords listed in Chapter 1 have heavier gauge wire.

Filler Panels Eight filler panels are included with each mainframe. Filler panels are installed in empty module slots.

Serial Cable A 1-meter serial cable that connects to the J1 connector next to the GPIB connector. This is used to serially connect two mainframes or a mainframe with power supplies that have the serial-link capability on the same GPIB address.

Keyboard A quick reference card for the optional Agilent 66001A MPS Keyboard is included with the

Reference mainframe.

Card

Manual

If applicable, change sheets may be included with this manual. If change sheets are included, make

Change Sheet the corrections to the manual.

Input Power

You can operate your mainframe either from a 87 - 132 Vac or a 174 - 250 Vac single phase ac power source. Refer to Chapter 1 for complete input power specifications and requirements.

Line Voltage Conversion

The mainframe contains no line voltage switches. Refer to the module User’s Guide for information on changing the line voltage.

Installation 13

Image 12
Contents Installation Guide Certification Safety Summary Safety Summary Declaration of Conformity Printing HistoryTable Of Contents Figures TablesSafety Considerations General InformationIntroduction Instrument IdentificationOptions and Parts DescriptionSpecifications and Supplemental Characteristics Specifications and Supplemental CharacteristicsINH/FLT Characteristics Maximum Ratings Installation InstallationInput Power Items SuppliedPower Cord Installation FusesTemperature Performance Location and CoolingBench Operation Rack MountingRear Panel Switches Frame Mode SwitchSwitch Settings Installation Module Installation Module RemovalMainframe Turn-On Checkout Connections Rear PanelModule Connections MPS Mainframe/Power Supply Connections Controller ConnectionsKeyboard Connection Digital ConnectionsController Connections Digital Connector Trigger ConnectionsExamples of the Remote Inhibit Function Connections Index Agilent Sales and Support Offices United States Latin AmericaManual Updates