2. What’s in the box
Mast mounting hardware
Antenna (1) | Wing Boom Brackets (2) | |
|
| |
|
|
|
Small 13/16" wing | Large 1" main | Matching 300 | Large | Small |
boom end plugs | boom end plugs | to 75 ohm | wing nuts | wing nuts |
(2) | (2) | transformer (1) | (7/8" wing span) (2) | (3/4" wing span) (5) |
|
|
|
|
|
DANGER
WATCH FOR
WIRES
You can be KILLED if this
product comes near electric power lines.
READ INSTRUCTIONS
Usted puedo SER MATADO si este producto viene cerca de lineas de la energia eléctrica.
LEA LAS INSTRUCCIONES ll y a danger de mort si ce produit entre en contact avec des fils électriques.
LIRE LES INSTRUCTIONS
1 1/4" | 1 1/2" | #10 flat washers | 1/4 - 20 lock nut | ||
machine screws | machine screws | (2) | (2) | ||
Warning Label | |||||
(4) | (1) |
|
| ||
|
|
|
Wall mounting hardware
Mounting clamp | Wall brackets (2) | Reinforcing plates | 2" lag screws (4) | 1/4" x 20 | 3/4" tap screw (1) |
assemblies (2) |
| (2) |
| hex nuts (4) |
|
*Extra parts may be included
2.2What you’ll also need.
•Flat head screwdriver
•Ratchet or driver with 1/2" (13 mm) socket
•Portable or electric drill
•1/4" (6 mm) drill bit and stud finder for drywall installation
•3/8" (10 mm) masonry bit for concrete installation