Belkin F1DA104Z Mounting the PRO3 KVM Switch, Bracket Installation F1DA108Z and F1DA116Z

Page 13

Installation

Mounting the PRO3 KVM Switch

Bracket Installation (F1DA108Z and F1DA116Z)

Eight- or 16-Port PRO3 KVM Switches include adjustable mounting brackets ideal for installation in 19-inch racks. The mounting brackets feature three adjustment positions to allow you to set the PRO3 KVM Switch’s face flush with the ends of the rails or to extend the PRO3 KVM Switch past the front of the rails. Please follow these simple steps to achieve the desired adjustment.

Step 1

Determine how far you would like the PRO3 KVM Switch to protrude from the rack. Select a bracket-hole scheme.

Step 2

Attach the bracket to the side of your PRO3 KVM Switch using the Phillips screws provided. (Refer to diagram below.)

Step 3

Mount the PRO3 KVM Switch to the rack-rail assembly. (Refer to diagram below.)

1

2

3

4

5

6

7

8

section

11

Image 13

Contents OmniView PRO3 KVM Switch Table of Contents Package Contents Hot Keys Feature OverviewFlash Upgrade Cables Equipment RequirementsSection OS Platforms System RequirementsKeyboards MiceFront View of the PRO3 KVM Switch Unit Display DiagramsBack View of the PRO3 KVM Switch Specifications Where to Place the PRO3 KVM Switch Pre-ConfigurationCable-Distance Requirements For PS/2 Servers For USB ServersBracket Installation F1DA108Z and F1DA116Z Mounting the PRO3 KVM SwitchStep Optional Bracket Installation F1DA104ZSection Connecting the Console to the PRO3 KVM Switch Section Connecting Servers to the PRO3 KVM Switch PS/2 Connection Power up your server Connecting Servers to the PRO3 KVM Switch USB Connection Section Connecting Multiple PRO3 KVM Switches Daisy-Chaining How to Assign a Bank Address BANK-DIP-Switch Configuration ChartGetting Started Example of Daisy-Chain ConfigurationConnecting the Primary and Secondary KVM Switches Step Connecting the Servers Step Powering Up the Systems Selecting a Server or Bank Using Hot-Key Commands Section Selecting a Bank Using Scroll Buttons Selecting a Server Using Direct-Access Port SelectorsAutoScan Mode On-Screen Display OSD OSD Keyboard CommandsMain OSD Main Menu User Setting Main-Menu-Page Keyboard CommandsUsername admin Password belkin LanguageHot Key Access ListAutoScan Time Command Function Keyboard Hot-Key-Command ShortcutsWindows Sun Micro Mac USB Keyboard Sun Combo and Mac Key MappingUpdating Firmware To update the firmware, you will need the following itemsCan I mix PS/2 and USB devices on the KVM console? How far can the server be from the PRO3 KVM Switch?Can I mix PS/2 and USB servers on the host side? Can I use the PRO3 KVM Switch to switch video signals only? Does the PRO3 KVM Switch require an AC adapter?Does the PRO3 KVM Switch support Linux? How long is the warranty for the PRO3 KVM Switch?Am getting a black screen on my monitor Server boots up, but the mouse does not work Mouse is not detected at boot upUSB TroubleshootingGlossary FCC Statement How state law relates to the warranty How to get serviceSection Belkin Tech Support Belkin B.V