Belkin F1DA116Z, F1DA104Z, F1DA108Z user manual Section

Page 17

Installation

Step 3

Connect the PS/2 or USB mouse cable to the mouse port on the back of the PRO3 KVM Switch in the “Console” section. (Refer to diagram below.)

Note: It is recommended to use all USB input devices or all PS/2 input devices when connecting to the console.

Step 4

Attach the power adapter to the DC power jack labeled “12VDC, 1A” located on the rear panel of the PRO3 KVM Switch. Only use the power adapter supplied with the unit. (Refer to diagram below.)

Your PRO3 KVM Switch is now installed and you are ready to connect your servers.

1

2

3

4

5

6

7

8

section

15

Image 17

Contents OmniView PRO3 KVM Switch Table of Contents Package Contents Hot Keys Feature OverviewFlash Upgrade Cables Equipment RequirementsSection OS Platforms System RequirementsKeyboards MiceFront View of the PRO3 KVM Switch Unit Display DiagramsBack View of the PRO3 KVM Switch Specifications Where to Place the PRO3 KVM Switch Pre-ConfigurationCable-Distance Requirements For PS/2 Servers For USB ServersBracket Installation F1DA108Z and F1DA116Z Mounting the PRO3 KVM SwitchStep Optional Bracket Installation F1DA104ZSection Connecting the Console to the PRO3 KVM Switch Section Connecting Servers to the PRO3 KVM Switch PS/2 Connection Power up your server Connecting Servers to the PRO3 KVM Switch USB Connection Section Connecting Multiple PRO3 KVM Switches Daisy-Chaining How to Assign a Bank Address BANK-DIP-Switch Configuration ChartGetting Started Example of Daisy-Chain ConfigurationConnecting the Primary and Secondary KVM Switches Step Connecting the Servers Step Powering Up the Systems Selecting a Server or Bank Using Hot-Key Commands Section Selecting a Bank Using Scroll Buttons Selecting a Server Using Direct-Access Port SelectorsAutoScan Mode Main OSD OSD Keyboard CommandsOn-Screen Display OSD Main Menu User Setting Main-Menu-Page Keyboard CommandsUsername admin Password belkin LanguageAutoScan Time Access ListHot Key Command Function Keyboard Hot-Key-Command ShortcutsWindows Sun Micro Mac USB Keyboard Sun Combo and Mac Key MappingUpdating Firmware To update the firmware, you will need the following itemsCan I mix PS/2 and USB servers on the host side? How far can the server be from the PRO3 KVM Switch?Can I mix PS/2 and USB devices on the KVM console? Can I use the PRO3 KVM Switch to switch video signals only? Does the PRO3 KVM Switch require an AC adapter?Does the PRO3 KVM Switch support Linux? How long is the warranty for the PRO3 KVM Switch?Am getting a black screen on my monitor Server boots up, but the mouse does not work Mouse is not detected at boot upUSB TroubleshootingGlossary FCC Statement How state law relates to the warranty How to get serviceSection Belkin Tech Support Belkin B.V