Belkin F1DA108Z, F1DA104Z, F1DA116Z Connecting the Primary and Secondary KVM Switches Step

Page 25

Installation

Connecting the Primary and Secondary KVM Switches: Step 1

Using the Daisy-Chain Cable (F1D108-CBL), connect one end to the “Daisy-Chain In” port on the primary KVM switch (BANK 00).

Step 2

Connect the other end of the Daisy-Chain Cable (F1D108-CBL) to the “Daisy-Chain Out” port of the first secondary KVM switch (BANK 01).

Step 3

To add secondary units, connect one end of the Daisy-Chain Cable (F1D108-CBL) to the “Daisy-Chain In” port on the first secondary KVM switch and the other end to the “Daisy-Chain Out” port of the next secondary KVM switch(for example, BANK 01).

Step 4

Repeat Step 3 for additional PRO3 KVM Switches you wish to daisy-chain together.

Note: Your PRO3 KVM Switch is backward-compatible with Belkin OmniView PRO2 KVM Switches with standard cabling (F1DA104T, F1DA108T, F1DA116T). In a daisy-chain configuration, the PRO3 KVM Switch with micro-cabling (F1DA104Z, F1DA108Z, F1DA116Z) must be designated as the primary

KVM switch.

1

2

3

4

5

6

7

8

section

23

Image 25

Contents OmniView PRO3 KVM Switch Table of Contents Package Contents Hot Keys Feature OverviewFlash Upgrade Cables Equipment RequirementsSection OS Platforms System RequirementsKeyboards MiceFront View of the PRO3 KVM Switch Unit Display DiagramsBack View of the PRO3 KVM Switch Specifications Where to Place the PRO3 KVM Switch Pre-ConfigurationCable-Distance Requirements For PS/2 Servers For USB ServersBracket Installation F1DA108Z and F1DA116Z Mounting the PRO3 KVM SwitchStep Optional Bracket Installation F1DA104ZSection Connecting the Console to the PRO3 KVM Switch Section Connecting Servers to the PRO3 KVM Switch PS/2 Connection Power up your server Connecting Servers to the PRO3 KVM Switch USB Connection Section Connecting Multiple PRO3 KVM Switches Daisy-Chaining How to Assign a Bank Address BANK-DIP-Switch Configuration ChartGetting Started Example of Daisy-Chain ConfigurationConnecting the Primary and Secondary KVM Switches Step Connecting the Servers Step Powering Up the Systems Selecting a Server or Bank Using Hot-Key Commands Section Selecting a Bank Using Scroll Buttons Selecting a Server Using Direct-Access Port SelectorsAutoScan Mode On-Screen Display OSD OSD Keyboard CommandsMain OSD Main Menu User Setting Main-Menu-Page Keyboard CommandsUsername admin Password belkin LanguageHot Key Access ListAutoScan Time Command Function Keyboard Hot-Key-Command ShortcutsWindows Sun Micro Mac USB Keyboard Sun Combo and Mac Key MappingUpdating Firmware To update the firmware, you will need the following itemsCan I mix PS/2 and USB devices on the KVM console? How far can the server be from the PRO3 KVM Switch?Can I mix PS/2 and USB servers on the host side? Can I use the PRO3 KVM Switch to switch video signals only? Does the PRO3 KVM Switch require an AC adapter?Does the PRO3 KVM Switch support Linux? How long is the warranty for the PRO3 KVM Switch?Am getting a black screen on my monitor Server boots up, but the mouse does not work Mouse is not detected at boot upUSB TroubleshootingGlossary FCC Statement How state law relates to the warranty How to get serviceSection Belkin Tech Support Belkin B.V