Belkin F1DA116Z, F1DA108Z user manual Optional Bracket Installation F1DA104Z, Step

Page 14

Installation

Note: If this PRO3 KVM Switch will be daisy-chained to another KVM switch, set the BANK address prior to installing on a rack. Refer to the section in this User Manual titled “Connecting Multiple PRO3 KVM Switches (Daisy-Chaining)”.

Your PRO3 KVM Switch is now mounted securely into the bracket and you are ready to connect the console.

Optional Bracket Installation (F1DA104Z)

The PRO3 4-Port KVM Switch can be installed into a 19-inch server rack using an optional OmniView Rack-Mount Kit (F1D005).

Step 1

Attach the rack-mount bracket to your 4-Port PRO3 KVM Switch using the Phillips screws provided. (Refer to diagram below.)

Step 2

Mount the 4-Port PRO3 KVM Switch to the rack-rail assembly. (Refer to diagram below.)

12

Image 14

Contents OmniView PRO3 KVM Switch Table of Contents Package Contents Feature Overview Hot KeysFlash Upgrade Equipment Requirements CablesSection Keyboards System RequirementsOS Platforms MiceUnit Display Diagrams Front View of the PRO3 KVM SwitchBack View of the PRO3 KVM Switch Specifications Cable-Distance Requirements For PS/2 Servers Pre-ConfigurationWhere to Place the PRO3 KVM Switch For USB ServersMounting the PRO3 KVM Switch Bracket Installation F1DA108Z and F1DA116ZOptional Bracket Installation F1DA104Z StepSection Connecting the Console to the PRO3 KVM Switch Section Connecting Servers to the PRO3 KVM Switch PS/2 Connection Power up your server Connecting Servers to the PRO3 KVM Switch USB Connection Section Connecting Multiple PRO3 KVM Switches Daisy-Chaining BANK-DIP-Switch Configuration Chart How to Assign a Bank AddressExample of Daisy-Chain Configuration Getting StartedConnecting the Primary and Secondary KVM Switches Step Connecting the Servers Step Powering Up the Systems Selecting a Server or Bank Using Hot-Key Commands Section Selecting a Server Using Direct-Access Port Selectors Selecting a Bank Using Scroll ButtonsAutoScan Mode Main OSD OSD Keyboard CommandsOn-Screen Display OSD Main Menu Username admin Password belkin Main-Menu-Page Keyboard CommandsUser Setting LanguageAutoScan Time Access ListHot Key Keyboard Hot-Key-Command Shortcuts Command FunctionSun Combo and Mac Key Mapping Windows Sun Micro Mac USB KeyboardTo update the firmware, you will need the following items Updating FirmwareCan I mix PS/2 and USB servers on the host side? How far can the server be from the PRO3 KVM Switch?Can I mix PS/2 and USB devices on the KVM console? Does the PRO3 KVM Switch support Linux? Does the PRO3 KVM Switch require an AC adapter?Can I use the PRO3 KVM Switch to switch video signals only? How long is the warranty for the PRO3 KVM Switch?Am getting a black screen on my monitor Mouse is not detected at boot up Server boots up, but the mouse does not workTroubleshooting USBGlossary FCC Statement How to get service How state law relates to the warrantySection Belkin Tech Support Belkin B.V