Belkin F1DE101G user manual Remote Access, Sync, Video settings

Page 15

INSTALLATION

Remote Access

Remote Access is a Java™ applet that displays the redirected screen, keyboard, and mouse of the remote host system to which the RIPC is attached. The web browser used for accessing the RIPC must supply a Java Runtime Environment, version 1.1 or higher. Remote Access will perform in much the same way from a remote location as if you were sitting directly in front of the computer itself. You will be able to use the keyboard and mouse in the usual way, however, the remote system will react to keyboard and mouse actions with a slight delay. The length of the delay depends on the bandwidth of the line over which you are connected to the RIPC. Open the applet by choosing the appropriate link in the navigation frame of the HTML.

Bottom Part of the Remote Access Applet

The Remote Access Applet offers the following features:

Auto adjust button

If the video displayed is of bad quality or distorted in some way, press this button and wait a few seconds while the RIPC adjusts for the best possible video quality.

Sync

Choose this option in order to synchronize the local with the remote mouse cursor.

Video settings

This opens a new window with elements to control the RIPC’s video settings. You can change some values related to brightness and contrast of the picture displayed, which may improve the video quality. It is also possible to revert to the default settings for all video modes or only the current one.

13

Image 15

Contents OmniView Table of Contents Introduction Package ContentsFeature Overview Equipment Requirements Hardware RequirementsSoftware Requirements Specifications Serial 02 Port LAN Port Ripc DiagramsConnection LED Link/Activity LEDHardware Installation InstallationSerial Power Reset Connecting the Computer or KVM USB Powering Up the Ripc Initial Network Configuration Connecting the Ripc to the Network Remote Access Video settingsSync Configuration via serial Following interfaces are supported PrerequisitesFor a secure connection, you must enter Log Into the RipcMain Screen Log Out from the Ripc Control Host Remote AccessControl Description Options Port by sending the appropriate hot key to the KVM switchMonitor mode is currently active Auto AdjustSync Detect Remote Access OptionsPower Management Unit Ripc Mouse SynchronizationSpecial Mouse Driver Single Direct Mouse ModeBadly Adjusted Picture Limitations of the Mouse SynchronizationVideo Settings Http Port Ports & ProtocolsForce Https Https PortFirewall IP access control parametersSSL Certificate Request Certificate ManagementSee Figure below Certificate Request Required InformationSSL Certificate Signing Request Settings & Configuration NetworkRemote Access Settings Network Settings MenuRemote Access Options Table Users & Passwords Modify User Description Users & Passwords TableAdd User Delete UserModem Settings Serial Port Settings TableSerial Port Modem Options Table Keyboard/Mouse Options Table Keyboard/Mouse SettingsKVM Switches Syntax to define a new hot key is as follows FirmwareRipc Video Modes Update FirmwareTilde Hot Key TableGlossary Does the Ripc work with non-Belkin KVM switches? What operating systems does the Ripc support?Does the Ripc put any strain on the servers? Video quality is bad or the picture is grainy Login failsRemote Access window can’t connect to the Ripc Remote mouse doesn’t work or is not synchronousBelkin Corporation Limited Five-Year Product Warranty FCC StatementCE Declaration of Conformity P74238-A