Belkin F1DE101G Remote Access Options, Power Management Unit, Ripc Mouse Synchronization

Page 22

USING YOUR RIPC

Remote Access Options

The Remote Access title bar displays information about the incoming (In:) and outgoing (Out:) network traffic. If you are using the compressed encoding, both compressed and uncompressed incoming traffic will be indicated.

Remote Access Title Bar

Power Management Unit

This provides a Java applet that enables the telnet protocol to open a connection to the RIPC. Its main use is the pass-through option for serial port 1, however, it also allows you to connect with a standard Telnet client. Telnet access must be enabled in the security settings.

RIPC Mouse Synchronization

The RIPC addresses a common KVM-device challenge, which is the synchronization between the local and remote mouse cursors. To do so, it uses an intelligent synchronization algorithm.

There are three ways to re-synchronize local and remote mouse signals:

Fast Sync

The fast synchronization is used to correct a temporary, but fixed skew. Choose the option using the Remote Access options menu or, if you defined a mouse synchronization hot key sequence, use it.

Sync Detect

If the sync doesn’t work, or if the mouse settings have been changed on the host system, use the intelligent re-synchronization. This method takes longer than the fast synchronization and can be accessed with the appropriate item in the Remote Access option menu. The intelligent synchronization requires a correctly adjusted picture. Use the auto-adjustment function or the manual correction in the Video Settings panel to set up the picture.

20

Image 22

Contents OmniView Table of Contents Package Contents IntroductionFeature Overview Hardware Requirements Equipment RequirementsSoftware Requirements Specifications Link/Activity LED Ripc DiagramsConnection LED Serial 02 Port LAN PortInstallation Hardware InstallationSerial Power Reset Connecting the Computer or KVM USB Powering Up the Ripc Initial Network Configuration Connecting the Ripc to the Network Video settings Remote AccessSync Configuration via serial Prerequisites Following interfaces are supportedLog Into the Ripc For a secure connection, you must enter Main Screen Control Host Remote Access Log Out from the RipcAuto Adjust Port by sending the appropriate hot key to the KVM switchMonitor mode is currently active Control Description OptionsRipc Mouse Synchronization Remote Access OptionsPower Management Unit Sync DetectLimitations of the Mouse Synchronization Single Direct Mouse ModeBadly Adjusted Picture Special Mouse DriverVideo Settings Https Port Ports & ProtocolsForce Https Http PortIP access control parameters FirewallCertificate Management SSL Certificate RequestCertificate Request Required Information See Figure belowSettings & Configuration Network SSL Certificate Signing RequestNetwork Settings Menu Remote Access SettingsRemote Access Options Table Users & Passwords Delete User Description Users & Passwords TableAdd User Modify UserSerial Port Settings Table Modem SettingsSerial Port Modem Options Table Keyboard/Mouse Settings Keyboard/Mouse Options TableKVM Switches Firmware Syntax to define a new hot key is as followsUpdate Firmware Ripc Video ModesHot Key Table TildeGlossary What operating systems does the Ripc support? Does the Ripc work with non-Belkin KVM switches?Does the Ripc put any strain on the servers? Remote mouse doesn’t work or is not synchronous Login failsRemote Access window can’t connect to the Ripc Video quality is bad or the picture is grainyFCC Statement Belkin Corporation Limited Five-Year Product WarrantyCE Declaration of Conformity P74238-A