Belkin PRO manual F2N036-06 F1D116xMSE

F1D116_OSD_AM_man.qxd 4/20/00 4:07 PM Page 9

Hardware Installation (continued)

6. Connect the first computer's mouse cable to the OmniView™ PRO. If using a

PS/2 cable (Belkin Part# F2N036-XX), connect one end to the PS/2 mouse portEn on the computer, and the other end to the PC1 PS/2 mouse port on the back of

the OmniView™.

If using a serial mouse cable (Belkin Part# F2N209-XX-T), connect the female end to a DB9 serial port on the computer, and the male end to the DB9 female end of F1D116xMSE combo mouse adapter. Then connect the PS/2 end of the combo mouse adapter to the PC1 PS/2 mouse port on the back of the OmniView™.

	PC16	PC15	PC14	PC13	PC12	PC11	PC10	PC9
SW	PC8	PC7	PC6	PC5	PC4	PC3	PC2	PC1
Back view of OmniView™ PRO								For PS/2 Mouse

F2N036-06

F1D116xMSE

For Serial Mouse

F2N025-XX-T

Back of PC

Back of PC

VGA MONITOR

RJ45 NETWORK

7. Connect the first computer's keyboard cable to the OmniView™ PRO. Using another PS/2 cable (Belkin Part# F2N036–XX), connect one end to the PS/2 keyboard port on the computer, and the other end to the PC1 keyboard port on the back of the OmniView™ PRO. If your computer has an AT-style keyboard port, you will need a PS/2-AT keyboard adapter (Belkin Part# F2N018).

PC16	PC15	PC14	PC13	PC12	PC11	PC10	PC9
SW
PC8	PC7	PC6	PC5	PC4	PC3	PC2	PC1

BackBackof OmniViewview of OmniView™ PRO ™ PRO

F2N036-06

Back of PC

Back of PC

VGA MONITOR

RJ45 NETWORK

8. Double check all of the connections. Make sure the keyboard and mouse cables go to the correct ports.

9. Repeat steps 5-7 for the remainder of the computers.

9