Belkin PRO2 user manual Specifications, Max. Resolution 2048x1536@85Hz Bandwidth 400MHz

Page 9

O V E RV I E W

Specifications

Part No.: F1DA104T, F1DA108T & F1DA116T

Power: 12-Volt DC, 1-Amp power adapter with center-pin positive polarity

Daisy-Chain:Maximum of 16 KVM Switches

Computer Connections Supported:

4(F1DA104T)

8(F1DA108T)

16(F1DA116T)

Keyboard Emulation: PS/2

Mouse Emulation: PS/2

Monitors Supported: VGA, SVGA, MultiSync, and LCD (optional adapter may be required)

Max. Resolution: 2048x1536@85Hz

Bandwidth: 400MHz

Keyboard Input: 6-pin miniDIN (PS/2)

Mouse Input: 6-pin miniDIN (PS/2)

VGA Port: 15-pin HDDB type

Port LED Indicators: 4 (F1DA104T)

8(F1DA108T)

16(F1DA116T)

Enclosure: Metal enclosure with high-impact plastic faceplate

Dimensions:

(F1DA104T) 11 x 1.75 x 6 inch (279mm x 44.5mm x 150mm) (F1DA108T)17.25 x 1.75 x 7.5 inch (438mm x 44.5mm x 190mm) (F1DA116T) 17.25 x 3.5 x 7.5 inch (438mm x 89mm x 190mm)

Weight:

(F1DA104T) 5.3 lbs. (2414.5 grams)

(F1DA108T) 9.2 lbs. (4181.5 grams)

(F1DA116T) 12 lbs. (5472.5 grams) Operating Temp.: 32° to 104° F (0~40° C) Storage Temp.: -4° to 140° F (20~60° C) Humidity: 0-80% RH, non-condensing

Warranty: 5 years

Note: Specifications are subject to change without notice.

7

Image 9

Contents OmniView Overview TA B L E O F C O N T E N T SOmniView Package ContentsE RV I E W Feature OverviewFront-Panel Push Button Equipment RequirementsLED Display Seven-Segment LED DisplayOperating Systems Side View of the PRO2 Back View of the PRO2 Front View of the PRO2Max. Resolution 2048x1536@85Hz Bandwidth 400MHz SpecificationsPre-Configuration STA L L AT I O NCable Distance Requirements Step-by-Step Installation Guide Installing the PRO2 into a Server RackBracket Installation F1DA108T and F1DA116T only Single PRO2 Installation USB Installation Connect the Computer PS/2 InstallationUSB cables Connecting Multiple PRO2s Daisy-ChainingDIP SWITCH# Bank DIP Switch Configuration ChartConnecting the Master Switch to the First Slave Switch InstallationBefore You Begin Adding Additional Slave UnitsConnecting the Computers Example of Daisy-Chain ConfigurationUsing Your PRO2 Powering up the Systems+ + Selecting a Computer Using Keyboard Hot Key CommandsSelecting a Computer Using Direct-Access Port Selectors AutoScan ModeI N G YO U R K V M SW I T C H Bank Up and Bank Down Scroll ButtonsKeyboard Hot Key Commands On-Screen Display Menu Control AutoScan Time To update the firmware, you will need the following itemsOSD Display Time Updating FirmwareSetting the PRO2 into Flash Mode Connecting ComputersOmniView KVM Switches Belkin KVM Switches and AccessoriesMATRIX2 USB OmniView All-In-One KVM CablesOmniView Accessories and Adapters PRO2 Series FAQs PRO2 Series FAQs PRO2 Series FAQs Troubleshooting GeneralVideo Mouse KeyboardMouse is not detected at boot-up USB F1DA104T, F1DA108T, F1DA116T WARRANTY, FCC , CE, Ices StatementP73782-A