Belkin OmniView manual Step Installing the Ripm into a Server Rack, See Fig

2-1 Hardware Installation

Installation

Step 1

Installing the RIPM into a Server Rack

The RIPM includes mounting brackets for installation in 19-inch racks.

1.1 Attach the included bracket to the top or bottom of the RIPM with the provided screws.

1.2 Mount the RIPM to the rack. See

Fig. 1.

Fig. 1

Note: Mounting screws for the rack are not included. Please use the specified screws from your rack’s manufacturer.

Warning: Before attempting to connect anything to the RIPM or your computer(s), please ensure that all your computer equipment and devices are powered off. Belkin Corporation is not responsible for damage caused by your failure to do so.

Step 2

Connecting your Console to the RIPM

2.1Connect your keyboard and mouse to the “Console” keyboard and

mouse ports on the RIPM.

2.2 Connect your monitor to the “Console” VGA port on the RIPM.

See Fig. 2.

Fig. 2

9