Belkin OmniView manual Upload a CD-ROM Image, Open and run the drive-redirection software

4-2 Virtual Media Menu Options

Upload a CD-ROM Image

Step 1: Open and run the drive-redirection software.

Step 2: When the drive-redirection software has connected, leave this window open and go to the CD-ROM image in the Virtual Media section of the RIPM interface.

Note: The IP address listed under “Connection From” is the IP address that is used as the share host address. To verify that the IP address assigned by the drive-redirection software is correct, connect the serial cable between the RIPM and the computer and open a hyperterminal session. Log in as “ping” and type the IP address exactly as it is in the “Share host” field. You should receive the output “<IP> is alive!”

1

2

3

4

5

6

section

36