Belkin OmniView manual Video Settings through the Remote Console

3-4 Remote Console Control Bar	The Remote Console
Video Settings through the Remote Console
1
2
3
4
5
6
7
8
9

1. Brightness	10
Controls the brightness of the picture.

2.Contrast

Controls the contrast sharpness of the picture.

3.Clock

Defines the horizontal frequency for a video line and depends on the video mode. Different video-card types may require different values here. The default settings in conjunction with the auto-adjustment procedure should be adequate for all common configurations. To achieve a better picture quality, you may try to change this setting together with the sampling phase.

4.Phase

Defines the phase for video sampling, used to control the display quality together with the setting for sampling clock.

5.Horizontal Offset

Allows you to use the left and right buttons to move the picture in a horizontal direction while this option is selected.

6.Vertical Offset

Allows you to use the left and right buttons to move the picture in a vertical direction while this option is selected.

7.Reset this Mode

Resets this specific mode’s settings to the factory-made defaults.

8.Reset all Modes

Resets all settings to the factory-made defaults.

9.Save Changes

Saves changes permanently.

10.Undo Changes Restores last settings.

1

2

3

4

5

6

section

26