Belkin OmniView manual Dynamic DNS Settiings

4-5 Device Settings

Menu Options

Dynamic DNS Settiings

1

2

3

4

5

6

7

8

1.Enable Dynamic DNS

This enables the Dynamic DNS service. This requires a configured DNS server IP address.

2.Dynamic DNS Server

The RIPM registers itself in regular intervals at this location. At the time of this publication, the dynamic DNS is a fixed setting since only dyndns.org is currently supported.

3.Host Name

RIPM is the host name provided by the dynamic DNS. Use the whole name, including the domain, i.e., “testserver.dyndns.org” (or “RIPM.dyndns.org”), and not just the actual host name.

4.Username

During your manual registration with the dynamic DNS, you must have registered this username.

Note: Spaces are not allowed within the username.

5.Password

During your manual registration with the dynamic DNS, you must have designated this password.

6.Check Time

The RIPM card registers itself in the dynamic DNS at “Check Time”.

7.Check Interval

This is the interval for reporting to the dynamic DNS by the RIPM.

Note: The RIPM has its own independent real-time clock. Be careful to ensure that the time setting of the RIPM is correct.

8.Use the helpful option “Delete saved external IP” if you would like to update your externally saved IP address. To delete the saved address, press the “Delete” button.

55