Belkin F1DP108G To edit a user, To delete a user, Blocking a standard user and View Only user

Page 38

Remote Installation

To edit a user:

1.Select the user from the list.

2.Click . You can now change all the available parameters—user name, permission type, and password.

3.Click to save the changes.

Note: For security, you should change the password for the default “admin” user name.

To delete a user:

1.Select the user from the list.

2.Click .

3.Click to save the changes.

Blocking a standard user and “View Only” user

An alternative to deleting a user is “blocking.” This means that the user’s name and password remained stored, but the user is unable to access the system.

To block a user:

1.Select the user from the list.

2.Check the “Block” box.

3.Click to save the changes.

Note: For security purposes, we recommend that you delete administrator accounts and not use this blocking feature.

1

2

3

4

5

6

7

8

9

10

section

35

Image 38
Contents OmniView SMB KVM-over-IP Switch Table of Contents Using the Switch from a Remote Console Using the Switch from a Local ConsolePackage Contents IntroductionRemote-Management Features OverviewOther Features OmniView SMB Server Equipment RequirementsServer Interface Modules Interface ModulesCables Belkin UTP Patch CablesSystem Requirements Back View Unit Display DiagramsFront View Specifications SMB Server Interface Module, PS/2 VGA-Cable Length USB-Cable Length SMB Server Interface Module, USBSMB Server Interface Module, Legacy Sun VGA-Cable Length MiniDIN8-Cable LengthWhere to place the Switch Local InstallationPre-Configuration Local Installation Cable-Distance Requirements for PS/2, USB, and Sun ServersMounting the Switch MAC Address Device NumberConnecting the Console to the Switch Local Installation Connecting Servers to the Switch PS/2 Connection Local Installation Connecting Servers to the Switch USB Connection Local Installation Connecting Servers to the Switch Sun MiniDIN8 Connection Local Installation Powering Up the Systems Daisy-Chaining Multiple KVM Switches Optional How to Assign a Bank AddressBANK-DIP-Switch-Configuration Chart SMB CAT5 KVM Switches DIP SWITCH# SMB CAT5 Bank AddressExample of Daisy-Chain Configuration Connecting the Primary and Secondary KVM Switches Getting StartedConnecting the servers Remote Installation Identifying the IP AddressLogin Logging into the Web InterfaceRemote Installation Required TCP Ports Network ConfigurationDevice Name Set a Static IP Enable DhcpSnmp Settings User User SettingsAdministrator View Only To add a new userBlocking a standard user and View Only user To edit a userTo delete a user To block a userSwitch Configuration Switch-ConfigurationTo specify and name servers Installing new Switch-Definition Files SDFsTo install the SDF Serial Settings To configure your serial deviceAccount Blocking Security SettingsPassword Policy SSL Certificate Idle TimeoutTo install an SSL certificate Maintenance Firmware Upgrade To upgrade firmwareLogging Out Restore Factory SettingsTo restore factory settings To start a remote session Using the Switch from a Remote ConsoleStarting a Remote Session Full-Screen Mode To work in full-screen modeHiding/Unhiding the Drop-Down Bar Using the Drop-Down BarDisconnecting the Remote Session To align mouse pointers Mouse Configuration and SettingsMouse-Pointer Alignment Mouse-Pointer CalibrationTo manually synchronize mouse pointers Manual SettingsYou must manually synchronize the mouse pointers if USB Option Mouse-Pointer Options Windows XPTo change the mouse-emulation settings Advanced-Mouse EmulationTo add a keyboard sequence Keyboard Configuration and SettingsTo transmit a keyboard sequence To record a keyboard sequence Add-Special-Key BoxTo refresh the video settings Video Configuration and SettingsManual Video Adjust To adjust the video manuallyAuto Video Adjust To adjust the video automaticallyPerformance Settings Bandwidth To change the bandwidth settingsSelecting a Server To connect to a different serverAdditional Features Session ProfileRestoring Factory Defaults To restore factory defaultsSelecting a Server or Bank Using the Switch from a Local ConsoleSelecting a Server or Bank Using Hot Keys G e W n Selecting a Server Using Port Selectors Selecting a Bank Using Scroll ButtonsAutoScan Mode On-Screen Display OSD Main OSD-MenuOSD-Menu Keyboard Commands Function/HelpScan Function/Help-Page Keyboard CommandsAdmin Password Scan TimeHot Key TimeoutMonitor-DDC2 Feature Hot-Key-Command Shortcuts Sun Combo Keys Sun Key Combo KeyUpdating Firmware Frequently Asked Questions Can I use the Switch on my Sun server that supports USB?Frequently Asked Questions Local Console ProblemSolution GeneralKeyboard MouseUSB Remote Console Video quality is bad and/or grainy Glossary Section FCC Statement Belkin International, Inc., Limited 2-Year Product WarrantyInformation How to get service Information Belkin Tech Support Belkin B.V
Related manuals
Manual 84 pages 50.94 Kb