Belkin F1DP108G user manual Maintenance, Firmware Upgrade To upgrade firmware

Page 44

Remote Installation

Maintenance

Firmware Upgrade

You can upgrade the Switch’s firmware to take advantage of new features or fixes as they become available. Visit www.belkin.com/support to check for firmware updates.

To upgrade firmware:

1.Download and save the firmware file on the client computer.

2.Select “Firmware Upgrade” under “Maintenance” in the far-left menu of the web interface. The Firmware-Upgrade page will appear (see Fig. 8).

3.Click to locate and install the firmware file.

4.Click “Start Upgrade”.

5.Once the upgrade is complete, click “Reboot”. The unit should reboot. After about 30 seconds, the Login page should appear.

Fig. 8 Firmware-Upgrade Page

Note: Depending on the type of firmware upgrade, the following settings

may be erased: user settings, switch-configuration settings, mouse and video adjustments, and RS232 serial-device settings. For more information, refer to the firmware release notes. The network settings will remain intact.

1

2

3

4

5

6

7

8

9

10

section

41

Image 44
Contents OmniView SMB KVM-over-IP Switch Table of Contents Using the Switch from a Remote Console Using the Switch from a Local ConsolePackage Contents IntroductionRemote-Management Features OverviewOther Features Equipment Requirements Server Interface ModulesOmniView SMB Server Interface ModulesCables Belkin UTP Patch CablesSystem Requirements Back View Unit Display DiagramsFront View Specifications SMB Server Interface Module, PS/2 SMB Server Interface Module, USB SMB Server Interface Module, Legacy SunVGA-Cable Length USB-Cable Length VGA-Cable Length MiniDIN8-Cable LengthWhere to place the Switch Local InstallationPre-Configuration Local Installation Cable-Distance Requirements for PS/2, USB, and Sun ServersMounting the Switch MAC Address Device NumberConnecting the Console to the Switch Local Installation Connecting Servers to the Switch PS/2 Connection Local Installation Connecting Servers to the Switch USB Connection Local Installation Connecting Servers to the Switch Sun MiniDIN8 Connection Local Installation Powering Up the Systems Daisy-Chaining Multiple KVM Switches Optional How to Assign a Bank AddressBANK-DIP-Switch-Configuration Chart SMB CAT5 KVM Switches DIP SWITCH# SMB CAT5 Bank AddressExample of Daisy-Chain Configuration Connecting the Primary and Secondary KVM Switches Getting StartedConnecting the servers Remote Installation Identifying the IP AddressLogin Logging into the Web InterfaceRemote Installation Required TCP Ports Network ConfigurationDevice Name Set a Static IP Enable DhcpSnmp Settings User User SettingsAdministrator View Only To add a new userTo edit a user To delete a userBlocking a standard user and View Only user To block a userSwitch Configuration Switch-ConfigurationTo specify and name servers Installing new Switch-Definition Files SDFsTo install the SDF Serial Settings To configure your serial deviceAccount Blocking Security SettingsPassword Policy SSL Certificate Idle TimeoutTo install an SSL certificate Maintenance Firmware Upgrade To upgrade firmwareLogging Out Restore Factory SettingsTo restore factory settings To start a remote session Using the Switch from a Remote ConsoleStarting a Remote Session Full-Screen Mode To work in full-screen modeHiding/Unhiding the Drop-Down Bar Using the Drop-Down BarDisconnecting the Remote Session Mouse Configuration and Settings Mouse-Pointer AlignmentTo align mouse pointers Mouse-Pointer CalibrationTo manually synchronize mouse pointers Manual SettingsYou must manually synchronize the mouse pointers if USB Option Mouse-Pointer Options Windows XPTo change the mouse-emulation settings Advanced-Mouse EmulationTo add a keyboard sequence Keyboard Configuration and SettingsTo transmit a keyboard sequence To record a keyboard sequence Add-Special-Key BoxVideo Configuration and Settings Manual Video AdjustTo refresh the video settings To adjust the video manuallyAuto Video Adjust To adjust the video automaticallyPerformance Settings Bandwidth To change the bandwidth settingsSelecting a Server To connect to a different serverAdditional Features Session ProfileRestoring Factory Defaults To restore factory defaultsSelecting a Server or Bank Using the Switch from a Local ConsoleSelecting a Server or Bank Using Hot Keys G e W n Selecting a Server Using Port Selectors Selecting a Bank Using Scroll ButtonsAutoScan Mode On-Screen Display OSD Main OSD-MenuOSD-Menu Keyboard Commands Function/HelpFunction/Help-Page Keyboard Commands Admin PasswordScan Scan TimeHot Key TimeoutMonitor-DDC2 Feature Hot-Key-Command Shortcuts Sun Combo Keys Sun Key Combo KeyUpdating Firmware Frequently Asked Questions Can I use the Switch on my Sun server that supports USB?Frequently Asked Questions Problem SolutionLocal Console GeneralKeyboard MouseUSB Remote Console Video quality is bad and/or grainy Glossary Section FCC Statement Belkin International, Inc., Limited 2-Year Product WarrantyInformation How to get service Information Belkin Tech Support Belkin B.V
Related manuals
Manual 84 pages 50.94 Kb