Belkin F1DP108G Function/Help-Page Keyboard Commands, Scan Time, Security, Admin Password

Using the Switch from a Remote Console

Function/Help-Page Keyboard Commands

Command	Function
F4	Initiate AutoScan
èê	Navigate to the next field
Insert	Highlight field for editing
Esc	Return to the main OSD menu
F10	Program Monitor-DDC2 settings to all Server
	Interface Modules
Space	Change options for selected field

Scan

This specifies whether the AutoScan feature is enabled or not. To enable or disable the AutoScan feature, use the arrow keys to navigate to the Scan field and press the space bar.

Scan Time

This specifies the amount of time the Switch remains on a server before switching to the next server while in AutoScan mode. You may set the scan-time interval to 1, 2, 3, 5, or 10 seconds, or “off”. To change the scan time, use the arrow keys to navigate to the Scan Time field, and type in the desired time interval (in seconds).

Security

This feature allows you to enable an administrator password to prevent unauthorized users from accessing the OSD on the local console. When enabled, switching can only be performed through the OSD. To enable or disable the Security feature, use the arrow keys to navigate to the Security field and press the space bar.

Note: If security is enabled, the user will not be allowed to switch remotely from the quick-access toolbar.

Admin Password

This allows you to specify the administrator password needed to access the OSD when the Security feature is enabled. To set the password, use the arrow keys to navigate to the Admin-Password field and type in the desired password. You may use up to eight uppercase characters for the password. Password characters are not case-sensitive. Press “Esc” or use the arrow keys to navigate to fields and save the password. Use the “Back Space” key to erase the password.

64