Belkin F1DP108G user manual Mouse Configuration and Settings, Mouse-Pointer Alignment

Using the Switch from a Remote Console

Mouse Configuration and Settings

Mouse-Pointer Alignment

When working remotely at the client computer, two mouse pointers will appear: one for the client computer and one for the target server. The client computer’s mouse pointer will appear on top of the target server’s. The mouse pointers should be synchronized (aligned). If they are not synchronized, follow the instructions below.

To align mouse pointers:

1.In the quick-access toolbar, click .

2.Select “Align” or press “Ctrl+M”.

Mouse-Pointer Calibration

A target server may have a different mouse-pointer speed than the client computer. Calibration automatically discovers the mouse speed of the target server and aligns the two pointers. When you calibrate pointers, the Switch saves the alignment, so calibration is only needed once per target server.

To calibrate mouse pointers (for servers running on Windows NT or 2000):

1.In the drop-down bar, click .

2.Select “Advanced Calibration”.

Note: If the video-noise level is above zero, calibration may not work properly. Go to “Video Adjustment” and try to eliminate the noise by pressing “Audio Video Adjust”, or by adjusting the bars in “Manual Video Adjust”, then perform the mouse calibration again.

46