Belkin F1DP108G user manual Advanced-Mouse Emulation, To change the mouse-emulation settings

Fig. 15 Mouse-Emulation Box

Using the Switch from a Remote Console

Advanced-Mouse Emulation

In the Advanced-Mouse settings, you can set the type of mouse you would like the Switch to emulate.

Note: Belkin recommends that you NOT change the advanced settings unless there is erratic mouse behavior (i.e., if the mouse is making random clicks and jumping arbitrarily around the screen).

To change the mouse-emulation settings:

1.Click . The Mouse-Emulation box will appear (see Fig. 15).

2.Select the type of mouse physically connected to the local console port on the Switch.

3.In the Max Rate box, choose the maximum mouse-report rate. For Sun Solaris systems, the default rate is 20 in order to support older Sun versions.

4.Click “OK”.

1

2

3

4

5

6

7

8

9

10

section

49