Belkin F5U015-TPW manual Appendices, Troubleshooting

Appendices

Troubleshooting

The SCSI device(s) connected to the USB-SCSI Adapter is not detected by my computer.

•Make sure the SCSI device(s) are powered up and at least one device provides termination power necessary for the Adapter’s operation. If you are just connecting one device and that device does not have termination power, make sure the power supply adapter provided with the package is connected. The SCSI device(s) must be powered up AND connected to the Adapter prior to plugging into the USB port.

•If you are using a USB Hub or composite device that has a built-in hub, make sure that the device is self-powered, providing the full 500mA of current required by the Adapter.

•After shutting down your computer, try unplugging then plugging in the Adapter from the USB port.

•Try unplugging the Adapter, turn the power off and back on of the SCSI device(s), then plugging the Adapter back into the USB port.

•Restart your computer with the Adapter connect to the USB port, and all the SCSI device(s) powered up.

8