Star Micronics DP8340R user manual General Specifications

6. GENERAL SPECIFICATIONS

Printing method	Serial impact dot matrix printing,
	9 wires
Number of print columns	29 columns (10CPI), 44 columns (15CPI)
Print speed	Approx. 2 lines/sec
Print direction	Bi-directional
Line spacing	1/6 inch
Paper feed method	Friction Feed
Paper feed speed	Approx. 12 lines/sec
Character set	ASCII		96 characters
	Special		64 characters
	Block graphics*		64 characters
Font configuration	10CPI	Ordinary characters	5 × 9 dots
		Block graphics*	6 × 6 dots
	15CPI	Ordinary characters	7 × 9 half dots
* Graphic Feed Not Available		Block graphics*	5 × 6 dots
		2.00 (H) × 2.42 (V) mm
Character size	10CPI
	15CPI	1.32 (H) × 2.42 (V) mm
Character spacing	10CPI	2.55 mm (1/10 inch)
	15CPI	1.70 mm (1/15 inch)
Dot spacing	10CPI	H=0.425 mm V=0.353 mm
	15CPI	H=0.340 mm V=0.353 mm
Gross dot	10CPI	174 dots/wire/line
	15CPI	220 dots/wire/line
Print area	10CPI	73.53 mm
	15CPI	74.46 mm
Print Buffer	Approx. 1.5 KB
Peripheral drive	1 output (1A max. at 12V)
Serial Interface
Model DP8340-RM	Only RS-232C
Model DP8340-RD	RS-232C/20mA Current Loop
External dimensions	202(W) × 200(D) × 98(H) mm
(Printer)
	(without paper holder, DC Power Connector)
(Power supply unit)	60(W) × 120(D) × 36(H) mm (without AC cable)
Weight
(Printer)	Approx. 1.9 kg
(Power supply unit)	Approx. 0.4 kg (without AC cable)

– 20 –