Star Micronics user manual Interface for Model DP8340RD D-SUB 25 PIN Connector

8.INTERFACE FOR MODEL DP8340RD (D-SUB 25 PIN CONNECTOR)

8-1. Interface Specifications

(1)Synchronization system Asynchronous

(2) Baud rate	150, 300, 600, 1200, 2400, 4800, 9600
	BPS (Selectable)

(3)World length

Start bit:	1 bit
Data bit:	7 or 8 bits (Selectable)
Parity bit:	Odd, Even, or None (Selectable)
Stop bit:	1 or 2 bit length (Selectable)

(4)Signal polarity

RS-232C	MARK	: Logic “1” (–3V to –25V)
	SPACE	: Logic “0” (+3V to +25V)
Current Loop	MARK	: Logic “1” (Current ON)
	SPACE	: Logic “0” (Current OFF)

1Start bit

2 Data bits

3 Parity bit

4 Stop bit

(5)Handshaking

1 DTR Mode (1 block)

2 X-ON/Y-OFF Mode

3 STX-ETX Mode

Note: STX-ETX Mode may use DTR or X-ON/Y-OFF, selected by DIP SW 1- 5. See Chapter 9. for details.

– 30 –