Install the
Figure 2-3. Installation of Re-Roll Prevention
2-3. Handling Notes
(1)Install the printer near an easily accessible
(2)Place the unit on a flat and stable surface for operation.
(3)Do not connect the AC Power Plug to the same outlet used for other noise generating devices (large motors, etc.).
(4)Be careful not to drop paper clips, pins and other foreign objects into the unit.
(5)Wipe off dirt with a soft cloth soaked in alcohol or benzine. Do not use Lacquer thinner, Trichlorethelene or Ketone solvents because they may damage plastic parts.
(6)Use a soft brush, etc. for cleaning the printer mechanism and PCB.
(7)Keep hands out of printer while power is on.
(8)Do not attempt to print when there is no ink ribbon or paper in the unit. The print head life could be severly reduced.
(9)If the paper is fastened tightly to the roll, the paper may not detach from the roll when the end is reached.
If this happens, the no paper detection function and paper feed will not operate.
(10)Always keep the printer cover attached when printing to prevent paper jams, noise, and other problems.
(11)Always turn the power off before opening the printer cover. (e.g. When renewing a ink ribbon)
– 4 –