Part Functional Description | ||
(1) | AC Power Plug | Connect to an outlet of the specified voltage. |
(2) | DC Power Outlet | Supplies DC 12V power to the printer. |
(3) | Printer Cover | Protects the printer against dust and reduces noise. |
(4) | POWER Lamp | Lights up (green LED) when power is on. |
(5) | ON LINE Lamp | Lights up (green LED) when the unit is in the online |
|
| mode. |
(6) | ALARM Lamp | Lights up (red LED) when printer operation is not |
|
| normal, or the printer is out of paper. It is necessary |
|
| to install paper into the printer and press the ON |
|
| LINE Button to recover from paper empty status. |
|
| Turn off the printer power in order to recover from |
|
| abnormal operation. |
(7) | ON LINE Button | Toggles between the |
|
| printer will go |
(8) | FEED Button | Momentary operation of this button provides one |
|
| line feed. Pressing this button continuously will |
|
| cause continuous paper feed. If power is turned on |
|
| while pressing this button, self printing*1 will be |
|
| performed. |
(9) | Interface Connector | Connects the printer to host computers. Check that |
|
| both computer and printer are off before connecting. |
(10) | DIP Switches | Allows for setting of various functions according to |
|
| user requirements. |
*1 | Self Printing | This printer has another convenient function, the |
|
| Automatic Test Printing. With the ink ribbon and |
|
| paper properly installed in the printer, turn the power |
ON while holding down the Feed switch. Test print- ing will start and stop again automatically.
– 7 –