TRENDnet TEW-P1U1P manual PTP Printer Port Setup, If your Wireless Print Server is not listed

Page 21

PTP Printer Port Setup

1.The program will search for Printer Servers on the network, and a screen like the following will be displayed.

•If desired, click Refresh.

•The name of the attached printer will be displayed if possible. If "No printer" is displayed, check that the printer is properly connected and powered on.

Figure 14: Print Port Setup (Peer-to-peer Printing)

If your Wireless Print Server is not listed:

•Click the "Refresh" button.

•Check that both the Wireless Print Server and the printer are properly connected, and powered on.

•Check that the Wireless Print Server has been configured. (Use the Setup Wizard on the CD-ROM.)

•If using TCP/IP, try installing the NetBEUI protocol. (See the earlier section Checking your Network Protocols for details.). Then try again.

2.Select the desired port on a Wireless Print Server (Port 1: Parallel port, Port 2: USB port), then click Next. A pop-up message will inform you if the port has been created successfully.

If you see the following error message, either install Internet

Explorer 4 or later, or follow the procedure in the "Trouble

Shooting - Windows" section of Chapter 8.

Page 17

Page 20 Page 22
Image 21
Page 20 Page 22
Contents
Page Table of Contents Special Features BiAdmin Management UtilityTroubleshooting Web-Based ManagementAppendix B Network Server Configuration Appendix a SpecificationsIntroduction FeaturesSafety Instructions Description Package ContentsDiagnostic Push Button LED IndicatorsTo restore the factory default settings To generate a Diagnostic print outProcedure LAN InstallationConfiguration Wireless Print ServerUsing the Windows Wizard ProcedureWireless Print Server Screen If the desired Wireless Print Server is not listedWireless Configuration Required configurationAd-hoc Mode Default Infrastructure Mode Printing Methods Client PC ConfigurationChecking your Network Protocols Windows Which printing method should I use?Page Windows Peer-to-peer Printing Windows 2000/XP SetupCreate new Port Screen On this screen, select Custom, and click the Settings button Ports Tab Bidirectional Support Installation Screen Windows 9x/ME SetupIf your Wireless Print Server is not listed PTP Printer Port SetupManagement Configure Printer PortPort Advanced Port OptionsBanner Retry IntervalNetwork Neighborhood Windows SMB PrintingCapture Settings Windows 98/ME Select Start Settings Printers to open the Printers folderPrinting from MS-DOS Programs Capture Settings Windows 2000/XP Windows with Server-based Print Queues Advanced Setup and Management AppleTalk SetupMacintosh AppleTalk Software RequirementsLPR printing Setup Choose LPR Printers Using IPMacintosh OS Installation BiAdmin Management UtilityRequirements OperationDevice List Icons Device StatusPrinter Status Upgrade ConfigurationWizard RefreshDiagnostics menu ConfigurationMenus Main MenuSystem Screen System TabTCP/IP Screen TCP/IP TabAppleTalk Screen AppleTalk TabNetBEUI Screen NetBEUI TabInternet Printing Screen Internet Printing TabPort Tab Physical PortLogical Port Wireless Tab Selected DeviceChannel No WEP Encryption Link Info Screen Wireless Link Info ScreenPreparation Web-Based ManagementConnecting to the Wireless Print Server Configuration ScreensAppleTalk NetBEUI Abort Job if ErrorDomain Name Response TimeConnection Password Configure ServerEnable Protocols Print Server NameWireless Configuration WEP Data Privacy ConfigurationServer Status Other ScreensPrinter Ports Logical PrintersSpecial Features IPP Server ConfigurationInternet Printing Protocol IPP Installing from the CD-ROM IPP Client Setup Windows 95/98/Me/NT 4.0/XPInstalling using IPPCLIENT.EXE IPP Client Configuration Windows 95/98/ME/2000/XP/NTOpen the Printers folder Start Settings Printers Changing the IPP Port SettingsPort 2 if exists IPP Client Setup Windows 2000/XPUsing IPP Printers Internet Mail Printing Internet Wireless Print ServerSystem Requirements Mail ServerInternet Mail Printing Configuration User Software Installation User SoftwareUsing the new Port Checking the Printer Driver Printing through the InternetHardware & LAN Problems TroubleshootingProblem No All the Wireless Print Servers LEDs are off Problem NoProblem No My document didnt print to the right printer Problem No Why do I get an incorrect printout?Problem No My file doesnt print with the correct fonts Problem No My EPS file doesnt print with the correct fontsPage Windows Printing Problems To remove an existing printer port installationOpen Start Settings Control Panel Add/Remove Programs Page Then select File Properties Details Page General Specifications SpecificationsTEW-P1U1P Wireless Print Server Environmental SpecificationsProtocol Support Feature SupportGo to Start-Settings-Control Panel-Network Network Server ConfigurationWindows NT4.0 Server Adding TCP/IP Printing SupportWindows 2000 Message Windows 2000/2003 ServerWireless Print Server IP Address Configuration Other Wireless Print Server ConfigurationUnix Systems LPD Configuration LPD on IBM AIXField Entry Action Sample Command ProcedureLPD on System Adding Remote PrintersSelect Control Panel, then Printer Configuration LPD on LinuxField Data Chown daemon /usr/spool/Spoolerdir LPD on BSDChmod 775 /usr/spool/Spoolerdir Chgrp daemon /usr/spool/SpoolerdirPrinting using LPD Netware Systems OverviewCreating an Ndps Manager Object Creating an Ndps Printer Agent At the Identification page, click the Printer Agent ListSelect Remote LPR on IP in the Connection Type
Top Page Image Contents