TRENDnet TEW-P1U1P manual Wireless Print Server, Configuration, Overview, Using the Windows Wizard

Page 10

Chapter 3

3

Wireless Print Server

Configuration

This chapter provides an overview of the configuration process.

Overview

The Wireless Print Server is designed to support many different platforms, and the configuration required would depend upon the environment in which it is installed.

The Wireless Print Server usually requires configuration, but if there's a DHCP server on your network, then the device is just plug-and-play. A Windows-based setup Wizard is also provided on the CD-ROM to simplify this task.

PCs wishing to use the printer attached to the Wireless Print Server always require configuration. See Chapter 4- Client Configuration for details.

If you wish to use a queue-based printing system using Windows NT Server/Windows 2000/Windows XP, the Network Server must be configured as detailed in Appendix B - Network Server Configuration. However, it is not necessary to use a Network Server-based queue; client PCs can print directly to the Wireless Print Server using the Peer-to-peer Printing installed by the User setup option on the CD-ROM.

Configuration Methods

The following methods are available to perform the required Print Server configuration:

Windows-based Wizard - see below for details.

BiAdmin management utility program - see Chapter 8 for details.

Web-based setup - see Chapter 6 for details.

Advanced Configuration and Management

The BiAdmin management utility is provided for advanced configuration and management. This program is installed by default when the Administrator install option is chosen. See Chapter 5 for details on using BiAdmin.

Using the Windows Wizard

The Windows-based Wizard is supplied on the CD-ROM, and runs on Windows 95, 98, NT4.0, ME, Windows 2000 and Windows XP.

Using this Wizard is the recommended method to configure the Print Server.

It can be used configure the Wireless Print Server for your Network environment, even if the Print Server does not have a valid IP address.

Procedure

1.Insert the supplied CD-ROM into your drive. If the setup program does not start automatically, run AutoRun.exe in the root folder.

2.On the first screen, shown below, click Setup Wizard.

Page 6

Image 10
Contents Page Table of Contents Troubleshooting BiAdmin Management UtilitySpecial Features Web-Based ManagementAppendix a Specifications Appendix B Network Server ConfigurationFeatures IntroductionSafety Instructions Package Contents DescriptionTo restore the factory default settings LED IndicatorsDiagnostic Push Button To generate a Diagnostic print outLAN Installation ProcedureUsing the Windows Wizard Wireless Print ServerConfiguration ProcedureIf the desired Wireless Print Server is not listed Wireless Print Server ScreenRequired configuration Wireless ConfigurationAd-hoc Mode Default Infrastructure Mode Client PC Configuration Printing MethodsWhich printing method should I use? Checking your Network Protocols WindowsPage Windows 2000/XP Setup Windows Peer-to-peer PrintingCreate new Port Screen On this screen, select Custom, and click the Settings button Ports Tab Bidirectional Support Windows 9x/ME Setup Installation ScreenPTP Printer Port Setup If your Wireless Print Server is not listedConfigure Printer Port ManagementBanner Advanced Port OptionsPort Retry IntervalWindows SMB Printing Network NeighborhoodSelect Start Settings Printers to open the Printers folder Capture Settings Windows 98/MEPrinting from MS-DOS Programs Capture Settings Windows 2000/XP Windows with Server-based Print Queues Macintosh AppleTalk AppleTalk SetupAdvanced Setup and Management Software RequirementsChoose LPR Printers Using IP LPR printing SetupMacintosh OS Requirements BiAdmin Management UtilityInstallation OperationIcons Device Status Device ListPrinter Status Wizard ConfigurationUpgrade RefreshMenus ConfigurationDiagnostics menu Main MenuSystem Tab System ScreenTCP/IP Tab TCP/IP ScreenAppleTalk Tab AppleTalk ScreenNetBEUI Tab NetBEUI ScreenInternet Printing Tab Internet Printing ScreenPhysical Port Port TabLogical Port Selected Device Wireless TabChannel No WEP Encryption Wireless Link Info Screen Link Info ScreenWeb-Based Management PreparationConfiguration Screens Connecting to the Wireless Print ServerAppleTalk Domain Name Abort Job if ErrorNetBEUI Response TimeConnection Enable Protocols Configure ServerPassword Print Server NameWireless Configuration Configuration WEP Data PrivacyPrinter Ports Other ScreensServer Status Logical PrintersIPP Server Configuration Special FeaturesInternet Printing Protocol IPP Installing using IPPCLIENT.EXE IPP Client Setup Windows 95/98/Me/NT 4.0/XPInstalling from the CD-ROM IPP Client Configuration Windows 95/98/ME/2000/XP/NTChanging the IPP Port Settings Open the Printers folder Start Settings PrintersIPP Client Setup Windows 2000/XP Port 2 if existsUsing IPP Printers System Requirements Internet Wireless Print ServerInternet Mail Printing Mail ServerInternet Mail Printing Configuration Installation User Software User SoftwareUsing the new Port Printing through the Internet Checking the Printer DriverProblem No All the Wireless Print Servers LEDs are off TroubleshootingHardware & LAN Problems Problem NoProblem No My file doesnt print with the correct fonts Problem No Why do I get an incorrect printout?Problem No My document didnt print to the right printer Problem No My EPS file doesnt print with the correct fontsPage To remove an existing printer port installation Windows Printing ProblemsOpen Start Settings Control Panel Add/Remove Programs Page Then select File Properties Details Page TEW-P1U1P Wireless Print Server SpecificationsGeneral Specifications Environmental SpecificationsFeature Support Protocol SupportWindows NT4.0 Server Network Server ConfigurationGo to Start-Settings-Control Panel-Network Adding TCP/IP Printing SupportWindows 2000/2003 Server Windows 2000 MessageOther Wireless Print Server Configuration Wireless Print Server IP Address ConfigurationUnix Systems LPD on IBM AIX LPD ConfigurationField Entry LPD on System ProcedureAction Sample Command Adding Remote PrintersLPD on Linux Select Control Panel, then Printer ConfigurationField Data Chmod 775 /usr/spool/Spoolerdir LPD on BSDChown daemon /usr/spool/Spoolerdir Chgrp daemon /usr/spool/SpoolerdirPrinting using LPD Overview Netware SystemsCreating an Ndps Manager Object At the Identification page, click the Printer Agent List Creating an Ndps Printer AgentSelect Remote LPR on IP in the Connection Type