Problem No. 6 I can't select the "Remaining from:" item in the print dialog box.
Solution No. 6 If you have selected the Layout value, "2 Up", or "4 Up", you cannot access the Remaining from item. Choose other selections.
Problem No. 7 A cover page prints either on the first or the last page of the document.
Solution No. 7 Select one of these solutions:
•Turn the cover page feature off.
•Insert extra page breaks in your document to avoid the cover page printing on the first or last page of your document.
•Install the Apple LaserWriter 7 driver. You are having trouble printing with the Apple LaserWriter 8 driver.
Problem No. 8 Why do I have trouble printing with the LaserWriter 8?
Solution No. 8 Your application software may not be compatible with the LaserWriter 8 driver or your system may not meet the requirements of the LaserWriter 8 driver. Use the Apple LaserWriter 7 driver instead.
Problem No. 9 The colors on my printed output do not match the colors on my computer screen.
Solution No. 9 When the printer receives a color file, it tries to match the printed output color to the screen color. Sometimes the printer cannot match up the colors as closely as wanted. To alleviate this problem, perform the following steps:
•Choose "Calibrated Color/Grayscale" in the Print
•Check your monitor to make sure all settings (for example, brightness) are adjusted correctly.
Problem No. 10 When I send a print job, I get a PostScript Command error or no print out.
Solution No. 10 Check the communication protocols. The computer, Wireless Print
Server and printer must all be configured to the same communication protocol.(either Binary or ASCII).
To configure your system:
1.Choose which protocol you are going to use. You should check your printer; it may not give you a choice.
2.Set your printer to the correct protocol.
3.Use the computer's Print submenu to configure your computer to use the protocol you have chosen.
4.Configure the Wireless Print Server to use the same protocol as the printer and computer.
Page 59