TRENDnet TEW-P1U1P manual Wireless Tab, Selected Device, Channel No

Selected Device

This shows the name of the Print Server.

SSID

• If using an ESS (Extended Service Set, with multiple access

points) this ID is called an ESSID (Extended Service Set

Identifier).

• To communicate, all Wireless stations MUST use the same

SSID/ESSID. Change this value, or change the other Wireless

stations, to ensure each Wireless station has the same value.

• The default value is "ANY", so the Wireless station can join any

Ad-hoc group.

Note! The SSID is case sensitive.

Channel No

The effect of this setting depends on the Network Type setting:

• In Infrastructure mode, this setting has no effect. The Channel is

selected automatically, to match the Channel used by the Access

Point.

• In Ad-hocmode, Wireless stations will scan all Channels looking

for compatible groups to join. The Channel setting is used as a

default Channel.

If you experience interference (shown by lost connections and/or slow

data transfers) you may need to experiment with different channels.