TRENDnet 18-1106-33 user manual Contents

Page 3

Contents

1.	Introduction		3
2.	Safety information		3
	2.1	Safety precautions	3
	2.2	Safety standards	4
	2.3	Safety features	5
3.	Installation		6
	3.1	Unpacking and installation	6
	3.2	Tubing connections	7
	3.3	Recommended bath liquids	7
	3.4	Filling and draining the bath	8
	3.5	Mains connection	8
4.	Operation		9
	4.1	Start-up	9
	4.2	Setting the temperature limit	10
	4.3	Temperature setting limit	10
	4.4	Temperature setting	11
	4.5	Temperature correction value	11
5.	Trouble shooting		13
	5.1	Error messages	13
6.	Maintenance		14
	6.1	General	14
	6.2	Fuses	14
7.	Detailed Description		16
	7.1	General operating principle	16
	7.2	Front and rear panels	16
	7.3	Control panel	16
	7.4	Description of safety features	18
	7.5	Manual restart in operation mode 8	20
8.	Technical specification		22
9.	Ordering information		23
Short instructions (Back page)

Image 3

Contents MultiTemp Important user information Contents Page Safety information Safety precau- tionsIntroduction Safety standards Pump motor protection Safety features General cut-offRestart after power failure Protection against over-heatingUnpacking and installation InstallationInstallation Mains connection Start-up OperationSetting the temperature limit Tempera- ture setting limit Tempera- ture setting Tempera- ture correction value Operation Error messages Trouble shootingMaintenance GeneralDisposal Push Detailed Description Detailed Description Description of safety features General cut-off Protecting the pump motor Accurate Setting of Temperature LimitSetting mode 8 to on Manual restart in operation mode Restart after power failureResetting mode 8 to OFF Technical specifications ambient temperature 20 C Technical specificationsOrdering information Accessories Quantity Code NoPage Short instructions