Star Micronics D6-IN manual Installing a PCI Peripheral Card, Installing a PCI Card

Page 25

Chapter 3: Installing the D6-IN

Installing a PCI Peripheral Card

Micronics PCI slots accommodate all PCI peripherals that meet the PCI 2.1 specifications. Follow the steps below to install a PCI card:

1.Turn the computer system off and remove its cover.

2.Choose an unused PCI slot and remove the slot cover.

3.Insert the card with the bottom edge level to the slot. Never insert the card at an angle.

4.Carefully push the card straight down, making sure the card is fully inserted.

5.Replace the screw which holds the card into place.

6.Replace the computer cover.

7.Refer to the PCI card’s documentation additional instructions regarding installation and software driv- ers.

Figure 3-2: Installing a PCI Card

D6-IN System Board Manual

Image 25

Contents PCI/ISA D6-IN System Board Manual Copyright NoticesTable of Contents Bios Setup Utility Limited Warranty FCC Statement Declaration of Conformity List of Figures Introduction IntroductionFeatures Software Compatibility Common Names Before You BeginInstalling the D6-IN Quick InstallationQuick Installation Power-Up Screen Configuring the D6-IN Configuring the D6-IND6-IN System Board D6-IN System Board2Jumper settings to reset the real-time clock Jumper SettingsIDE LED Configuring the D6-IN 3Case and peripheral connectionsIntroduction Installing the D6-INChassis with standard hardware Tools RequiredSIMMs Supported System MemoryMixing EDO and FPM Memory Bank Memory Configurations8MBx32/36 2MBx32/36 Removing SIMMs Installing the SIMMsPush the lever down until it locks into place Installing a CPUInstalling a PCI Card Installing a PCI Peripheral CardInstalling an ISA Peripheral Card Installing an ISA Peripheral CardBios Setup Utility SetupPower-Up Screen Setting the Main Screen Running the Setup ProcedureVideo Bios IDE Adapters Hard Disk SetupSystem Time and Date Diskette a or BExternal Cache System BiosSystem Memory Extended MemoryIDE Device Submenu Autotype Fixed DiskMultiple-Sector Transfers Transfer ModeSerial Port B Mode Setting the Advanced ScreenSerial Port a Serial Port BReset Configuration Data Parallel Port ModeParallel Port Diskette ControllerDram Type Large Disk Access ModeUser Password Supervisor PasswordSecurity Screen Set User Password Set Supervisor PasswordDiskette Access Password on BootFixed Disk Boot Sector System Backup ReminderPower Management Mode Power ScreenSuspend Timeout Standby TimeoutFixed Disk Timeout Standby CPU SpeedStandby Break Events Mouse Wakeup EventBoot Sequence Boot ScreenSetup Prompt Post ErrorsFloppy Check Exit ScreenNumlock Specifications Infrared support for IrDA Environmental SpecificationsTwo USB ports optional Multiple sector transfer supportBattery Disposal Technical Support 510 Technical Support Fax RMA Department Technical SupportUK Technical Support UK Technical Support Fax +44 01256UK Technical Support BBS +44 Online ServicesAppendix a Technical Information D6-IN System Board Manual Appendix Post Messages Messages, possible causes and solutionsAppendix B Post Messages Cmos LCD read out showing the contents of port 80h Is not installed or is failing, the system board willAppendix C Beep and Post Codes Following pagesGet in Post Reg Code One beep Appendix D Hard Disk Drive Types Hard Disk Drive TypesAppendix D Hard Disk Drive Types Appendix E Updating the System Bios Updating the System BiosAppendix E Updating the System Bios Appendix F Warranties and Notices Limited WarrantyNon-Warranty Service FCC Statement Declaration of Conformity Glossary GlossaryInternal Cache Cache which is built into the CPU. See Cache Glossary Glossary Index Battery Disposal Beep and Post CodesIndex

D6-IN specifications

The Star Micronics D6-IN is a cutting-edge thermal printer designed to meet the demands of various industries, including retail, hospitality, and logistics. This printer exemplifies efficiency and versatility, making it an ideal choice for businesses that require reliable, high-quality printing solutions.

One of the main features of the D6-IN is its impressive printing speed. Capable of producing up to 200 mm per second, this printer ensures that receipts, labels, and other documents are generated quickly, helping to reduce customer wait times and enhance overall service efficiency. This speed does not come at the cost of print quality; the D6-IN delivers crisp and clear prints with a resolution of 203 dpi, ensuring that even the smallest text and intricate graphics are presented with exceptional clarity.

Another notable characteristic of the D6-IN is its robust connectivity options. This printer supports multiple interfaces, including USB, Ethernet, and Bluetooth, providing businesses with the flexibility to connect to a wide range of devices. Multi-device connectivity is essential in modern environments, facilitating seamless integration with point-of-sale systems, mobile devices, and other peripherals.

The D6-IN also features advanced technical capabilities, such as an embedded web server, which allows for easy configuration and monitoring of the printer over a network. This functionality ensures that businesses can manage their printing operations efficiently, making adjustments and diagnosing issues remotely when necessary.

The printer's compact design is another significant advantage, allowing it to fit easily into various workspaces without compromising performance. Its durable construction ensures that it can withstand the demands of busy environments, providing longevity and reliability that businesses can count on.

User-friendliness is a core design principle of the D6-IN, with features like drop-in paper loading, which simplifies the process of changing paper rolls. This ease of use results in minimal downtime and contributes to overall operational efficiency.

In summary, the Star Micronics D6-IN is a feature-rich thermal printer that combines speed, connectivity, and durability. Its exceptional print quality, versatile connectivity options, and user-friendly design make it an excellent choice for businesses looking to enhance their printing capabilities. With this printer, organizations can streamline their operations and provide better service to their customers, paving the way for increased productivity and success.