Star Micronics D6-IN manual Appendix E Updating the System Bios

Page 59

Appendix E: Updating the System BIOS

Appendix

E

If you encounter any problems during this process, or if you have questions about the procedure, please call Technical Support.

Updating the System BIOS

The Micronics system boards are designed so that the BIOS can be reprogrammed using a BIOS file. You can easily FLASH a BIOS by following the steps below:

1)After downloading the appropriate BIOS file from our BBS or Website, extract it to a bootable MS- DOS 6.X diskette.

2)Reboot your system with the MS-DOS 6.X diskette in the A: drive. To make sure a clean DOS environ- ment is loaded, press the F5 key while “Starting MS- DOS” is displayed. After the system has rebooted, the cursor will appear at the A:> prompt.

3)Now you can run the FLASH utility. The filename will be either “FSH” (or FSH20, FSH20G, etc.) or “PHLASH.” Type this filename at the A:> prompt (but don’t include its extension), followed by a space and the BIOS ROM image’s filename. This file will be included in the download and has a file length of about 131K. For example, to update the D6-IN to BIOS version 01, you would type:

PHLASH D6-IN_01.ROM [ENTER]

4)Once the FLASH process has begun, select [Y]es, if prompted, to allow auto-sensing of the part (the FLASH chip itself).

5)After the update process has completed and the system reboots, verify that the new BIOS version appears on-screen. If you have problems during this process, or if you have questions about the proce- dure, please call Technical Support.

NOTE: If the BIOS is somehow erased or doesn’t seem to accept the upgrade, you can have your original BIOS chip reprogrammed manually by Technical Support. There is a $29.95 fee for this service, which includes shipping charges to send your FLASH EPROM chip

D6-IN System Board Manual

57

Page 58 Page 60
Image 59
Page 58 Page 60
Contents PCI/ISA D6-IN System Board Manual Copyright NoticesTable of Contents Bios Setup Utility Limited Warranty FCC Statement Declaration of Conformity List of Figures Introduction IntroductionFeatures Software Compatibility Common Names Before You BeginQuick Installation Quick InstallationInstalling the D6-IN Power-Up Screen Configuring the D6-IN Configuring the D6-IND6-IN System Board D6-IN System Board2Jumper settings to reset the real-time clock Jumper SettingsIDE LED Configuring the D6-IN 3Case and peripheral connectionsIntroduction Installing the D6-INChassis with standard hardware Tools RequiredSIMMs Supported System MemoryMixing EDO and FPM Memory Bank Memory Configurations8MBx32/36 2MBx32/36 Removing SIMMs Installing the SIMMsPush the lever down until it locks into place Installing a CPUInstalling a PCI Card Installing a PCI Peripheral CardInstalling an ISA Peripheral Card Installing an ISA Peripheral CardBios Setup Utility SetupPower-Up Screen Setting the Main Screen Running the Setup ProcedureDiskette a or B IDE Adapters Hard Disk SetupVideo Bios System Time and DateExtended Memory System BiosExternal Cache System MemoryIDE Device Submenu Autotype Fixed DiskMultiple-Sector Transfers Transfer ModeSerial Port B Setting the Advanced ScreenSerial Port B Mode Serial Port aDiskette Controller Parallel Port ModeReset Configuration Data Parallel PortDram Type Large Disk Access ModeSecurity Screen Supervisor PasswordUser Password Set User Password Set Supervisor PasswordSystem Backup Reminder Password on BootDiskette Access Fixed Disk Boot SectorPower Management Mode Power ScreenStandby CPU Speed Standby TimeoutSuspend Timeout Fixed Disk TimeoutStandby Break Events Mouse Wakeup EventPost Errors Boot ScreenBoot Sequence Setup PromptNumlock Exit ScreenFloppy Check Specifications Multiple sector transfer support Environmental SpecificationsInfrared support for IrDA Two USB ports optionalBattery Disposal UK Technical Support Fax +44 01256 Technical SupportTechnical Support 510 Technical Support Fax RMA Department UK Technical SupportUK Technical Support BBS +44 Online ServicesAppendix a Technical Information D6-IN System Board Manual Appendix B Post Messages Messages, possible causes and solutionsAppendix Post Messages Cmos Following pages Is not installed or is failing, the system board willLCD read out showing the contents of port 80h Appendix C Beep and Post CodesGet in Post Reg Code One beep Appendix D Hard Disk Drive Types Hard Disk Drive TypesAppendix D Hard Disk Drive Types Appendix E Updating the System Bios Updating the System BiosAppendix E Updating the System Bios Appendix F Warranties and Notices Limited WarrantyNon-Warranty Service FCC Statement Declaration of Conformity Glossary GlossaryInternal Cache Cache which is built into the CPU. See Cache Glossary Glossary Index Battery Disposal Beep and Post CodesIndex

D6-IN specifications

The Star Micronics D6-IN is a cutting-edge thermal printer designed to meet the demands of various industries, including retail, hospitality, and logistics. This printer exemplifies efficiency and versatility, making it an ideal choice for businesses that require reliable, high-quality printing solutions.

One of the main features of the D6-IN is its impressive printing speed. Capable of producing up to 200 mm per second, this printer ensures that receipts, labels, and other documents are generated quickly, helping to reduce customer wait times and enhance overall service efficiency. This speed does not come at the cost of print quality; the D6-IN delivers crisp and clear prints with a resolution of 203 dpi, ensuring that even the smallest text and intricate graphics are presented with exceptional clarity.

Another notable characteristic of the D6-IN is its robust connectivity options. This printer supports multiple interfaces, including USB, Ethernet, and Bluetooth, providing businesses with the flexibility to connect to a wide range of devices. Multi-device connectivity is essential in modern environments, facilitating seamless integration with point-of-sale systems, mobile devices, and other peripherals.

The D6-IN also features advanced technical capabilities, such as an embedded web server, which allows for easy configuration and monitoring of the printer over a network. This functionality ensures that businesses can manage their printing operations efficiently, making adjustments and diagnosing issues remotely when necessary.

The printer's compact design is another significant advantage, allowing it to fit easily into various workspaces without compromising performance. Its durable construction ensures that it can withstand the demands of busy environments, providing longevity and reliability that businesses can count on.

User-friendliness is a core design principle of the D6-IN, with features like drop-in paper loading, which simplifies the process of changing paper rolls. This ease of use results in minimal downtime and contributes to overall operational efficiency.

In summary, the Star Micronics D6-IN is a feature-rich thermal printer that combines speed, connectivity, and durability. Its exceptional print quality, versatile connectivity options, and user-friendly design make it an excellent choice for businesses looking to enhance their printing capabilities. With this printer, organizations can streamline their operations and provide better service to their customers, paving the way for increased productivity and success.
Top Page Image Contents