Star Micronics NX-2420 user manual Above statement applies only IOprinkrs marketed in the USA

Page 2

Federal Communications Commission

Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio f uency energy and, if not installed and used in accordance with the instructions, may cause harmful inte3 etmce

to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and at, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radiofl technician for help.

Unauthorized modifications of this product by the user will void his authority to operate the equipment unless expressly approved by the patty responsible for compliance.

For compliance with the Federal Noise Interference Standard, this equipment requires a shielded cable.

The above statement applies only IOprinkrs marketed in the USA.

Statement of

The Canadian Department of Communications

Radio Interference Regulations

This digitalapparatus does not exceed the Class B limits for radionoise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.

Le present appareil numerique n’&nen pas de bruits radio&ctriques depassant les limites applicables aux appareils numeriques de la classe B prescrites darts le Rtglement sur le brouillage radio&crrique

Cdicd par le minisbe des Communications du Canada.

The above statement applies only lo printers m&led in Canado.

Trademark Acknowledgements

NX-2420, XB-2410, NX-2410, SPC-8K, SF-lODQ, RH-1OZ: Star Micronics Co., Ltd.

IBM PC, PC-AT,PC-XT,Proprinter X24E, Proprinter X24, PC-DOS:International Business Ma- chines Co .

Microsoft % ASIC, MS-DOS: Microsoft Corporation

LQ-860, LQ-850:Seiko Epson Corp.

NOTICE

•All rights reserved. Reproduction of any part of this manual in any form whatsoever without STAR’s express permission is forbidden.

•The contents of this manual are subject to change without notice.

. All efforts have been made to ensure the accuracy of the contents of this manual at the time of

~;e~;e$wever, should any errors be detected, STAR would greatly appreciate being informed

. The above notwithstanding, STAR can assume no responsibility for any errors in this manual.

0 Copyright 1990 Star Micronics Co., Ltd.

Page 1 Page 3
Image 2
Page 1 Page 3
Contents NX-2420 Above statement applies only IOprinkrs marketed in the USA HOW to USE this Manual Page Features of the Printer Table of Contents Default Settings Specifications Chapter Checking the carton contents Den tifying printer parts Printer’s external partsInstalling the ribbon cartridge and the roller unit Mounting the platen knobFigum 1-4. Removing the top cover Page Hgure 1-7. Install the roller unit onto the printer Slide the cartridge into the slot with the power switch off Ins falling the optional cartridgeConnecting the printer to your computer Connecting the interface cableAutomatic loading Loading Single SheetsFigure I-17. Loading a single sheet Manual loading Loading and Parking Fanfold Forms Loading the paper from the rear of the printerPage 75.Mounting the paper guide for fanfold forms Loading the paper from the bottom of the printer Figure l-16.Pull up the tractor unit for bottom feedingPaper parking Paper unparking Loading MULTI-PART Forms Adjusting the Printing GAP Paper Type Weight Memo Control Panel Operations On Line button Paper Feed buttonSET/EJECT/PARK button Pitch buttonFont button Short test mode POWER-UP FunctionsLong test mode Stay in Panel Font Print area test modeStay in Panel Pitch Stay in Panel Pitch and FontHexadecimal dump Lprint CHR$I NextOUT &H3BC,I OUT &H3BE,S OUT &H3BE,J Return Form feed Top of formChanging the auto loading value Forward micro-feedReverse micro-feed Clearing the buffer/All reset Selecting the print color Store Macro DefinitionPage Default Settings Functions of the EDS SElTlNGS Page 1OCPIDRAFT 1OCPIHS Draft OFF 17CPIDRAFT Page LoFFloFFloml Bidirectional TEST/ADJUSTMENT Mode Raft On LNE Printer Control Commands Select draft elite characters Select draft quality charactersSelect draft pica characters Select draft condensed charactersSelect LQ elite characters Select CharactersSelect LQ pica characters Select LQ condensed CharactersSelect font Select LQ proportional CharactersSelect LQ font Select upright characters Cancel emphasized printingSelect italic Characters Emphasized printingStop underlining Cancel double-s trike printingStart underlining Starf VerliningSuperscript Select scoreSelect ornament character Select standard character set Cancel superscript or subscriptSubscript Select IBM character setSelect international character set Select character Set #ISelect character set #2 Select IBM code Enable printing of all character codesEnable printing of all character codes on next character Pica pitch Select slash zeroSelect normal zero Elite pitchSemi-condensed Cancel condensed printingCancel expanded printing Condensed printingSelect character width Cancel one-line expanded printingExpanded printing for one line Select proportional spacingIncrease character spacing Select master print modeSelect fixed spacing Print double-height characters Select double or quadruple sizeSelect character size Return to normal height Select character height, width, and line spacingSet line spacing to l/6 inch Set line spacing to l/8 inchSet line spacing to 7160or 7/72 inch Set line spacing to n/360 inchSet line spacing to n/60 inch or n/72 inch Set base unit for line spacingSet line spacing to n/180 inch or n/216 inch Execute ES Select forward feed modeSelect reverse feed mode Line feedFeed paper n lines Perform one n/l804nch or n/216=inch line feedPerform one n/180-inch reverse line feed Set top of page at current positionSet bottom margin Cancel bottom marginSet page length to n inches Return to top of current Disable paper-out detectorEnable paper-out detector Set vertical tab stopsSelect vertical tab channel Set vertical tab stops every n linesSet vertical tab stops in channel Vertical tabSet left margin Set right marginCarriage return Cancel automa tic line feedSet left and right margins Set automatic line feedRight justify Left justifyCenter text Full justifySet horizontal tab stops every n columns Reset all tab stopsSet horizontal tab stops Horizontal TabAbsolute horizontal tab in inches Relative horizontal TabRelative horizontal tab in inches Absolute horizontal tab in columnsPrint double-density, double-speed g-bit graphics Print normal-density g-bit graphicsPrint double-density g-bit graphics Print quadruple-density g-bit graphicsSe/ect graphics mode Print hex-density 24-bit graphicsSeiecf graphics mode Convert graphics DensityDefine download characters ?n4 Shift download character area Copy character set from ROM into RAMSelect download character set Select draft condensed download characters Select draft pica download character setSelect draft elite download character set Select LQ pica download charactersSelect LQ proportional download characters Select L Q elite download charactersSelect LQ condensed download characters Select ROM character setSelect print color Set MSB toDelete last character sent Cancel last lineAccept MSB as is Set printer off-lineBidirectional printing Stop printingBell Unidirectional printingAuto feed Reset printerManual feed Eject paper from ASF

NX-2420 specifications

The Star Micronics NX-2420 is a leading-edge thermal printer designed to meet the diverse demands of modern businesses. Renowned for its compact design and robust build, the NX-2420 excels in performance and versatility, making it an ideal choice for retail, hospitality, and various other industries.

One of the standout features of the NX-2420 is its high-speed printing capability. With a print speed of up to 200 millimeters per second, it ensures that transactions are completed promptly, delivering receipts and labels without delay. This efficiency helps businesses provide superior customer service, especially during peak hours.

The NX-2420 supports multiple paper widths, accommodating various label and receipt sizes. This flexibility allows businesses to tailor their printing solutions to fit specific needs, whether they require larger labels for shipping or smaller receipts for purchases. The printer also utilizes direct thermal printing technology, eliminating the need for ink or toner. This not only reduces ongoing operational costs but also minimizes maintenance efforts, making it a user-friendly option.

Connectivity is a crucial aspect of the NX-2420. It offers a range of connectivity options, including USB, Ethernet, and Bluetooth, enabling seamless integration with existing systems and wireless printing from mobile devices. This flexibility is particularly beneficial for businesses that utilize point-of-sale (POS) systems and want to enhance their overall operational efficiency.

Another notable characteristic of the NX-2420 is its durability. Built to withstand the rigors of a busy environment, this printer features a robust casing and is designed to handle high-volume printing tasks. Furthermore, it operates quietly, contributing to a more pleasant working atmosphere for staff and customers alike.

In addition to standard printing capabilities, the NX-2420 is also equipped with advanced features such as an integrated cutter for precise label cutting and an optional built-in camera that enhances functionality in specific applications. This adaptability makes the NX-2420 suitable for a wide range of scenarios, from retail checkout counters to inventory management systems.

In conclusion, the Star Micronics NX-2420 is an exceptional thermal printer that combines speed, durability, and versatility. With its array of features and technologies, it stands out as a reliable choice for businesses looking to enhance their printing solutions and improve operational efficiency. Whether for creating receipts, labels, or tickets, the NX-2420 is poised to meet the demands of today's dynamic business environment.
Top Page Image Contents