Star Micronics NX-2420 user manual Loading MULTI-PART Forms

Page 27

LOADING MULTI-PART FORMS

You can print on continuous multi-part forms with the built-in tractor unit. You can use multi-part forms that have up to five parts including the original when the Multi-part mode is selected with the EDS setting. (For details, please refer to Chapter 3.)

It is recommended to use forms jointed by dotted orpasting under the normal office condition.

LMulti-part forms should be pressure sensitive, and should not be used in the friction feed. (Bottom feed with the pull-tractor is recommended.)

NOTE: When printing continuous multi-part forms, care should be taken, as the edges of the paper might be damaged.

The tolerance between the dotted or pasted position and other positions must be less than 0.05 mm.

19

Page 26 Page 28
Image 27
Page 26 Page 28
Contents NX-2420 Above statement applies only IOprinkrs marketed in the USA HOW to USE this Manual Page Features of the Printer Table of Contents Default Settings Specifications Chapter Checking the carton contents Printer’s external parts Den tifying printer partsMounting the platen knob Installing the ribbon cartridge and the roller unitFigum 1-4. Removing the top cover Page Hgure 1-7. Install the roller unit onto the printer Ins falling the optional cartridge Slide the cartridge into the slot with the power switch offConnecting the interface cable Connecting the printer to your computerLoading Single Sheets Automatic loadingFigure I-17. Loading a single sheet Manual loading Loading the paper from the rear of the printer Loading and Parking Fanfold FormsPage 75.Mounting the paper guide for fanfold forms Figure l-16.Pull up the tractor unit for bottom feeding Loading the paper from the bottom of the printerPaper parking Paper unparking Loading MULTI-PART Forms Adjusting the Printing GAP Paper Type Weight Memo Control Panel Operations Paper Feed button On Line buttonPitch button SET/EJECT/PARK buttonFont button POWER-UP Functions Short test modeLong test mode Stay in Panel Pitch and Font Print area test modeStay in Panel Pitch Stay in Panel FontLprint CHR$I Next Hexadecimal dumpOUT &H3BC,I OUT &H3BE,S OUT &H3BE,J Return Top of form Form feedForward micro-feed Reverse micro-feedChanging the auto loading value Clearing the buffer/All reset Store Macro Definition Selecting the print colorPage Default Settings Functions of the EDS SElTlNGS Page 1OCPIDRAFT 1OCPIHS Draft OFF 17CPIDRAFT Page LoFFloFFloml Bidirectional TEST/ADJUSTMENT Mode Raft On LNE Printer Control Commands Select draft condensed characters Select draft quality charactersSelect draft pica characters Select draft elite charactersSelect LQ condensed Characters Select CharactersSelect LQ pica characters Select LQ elite charactersSelect LQ proportional Characters Select LQ fontSelect font Emphasized printing Cancel emphasized printingSelect italic Characters Select upright charactersStarf Verlining Cancel double-s trike printingStart underlining Stop underliningSelect score Select ornament characterSuperscript Select IBM character set Cancel superscript or subscriptSubscript Select standard character setSelect character Set #I Select character set #2Select international character set Enable printing of all character codes Enable printing of all character codes on next characterSelect IBM code Elite pitch Select slash zeroSelect normal zero Pica pitchCondensed printing Cancel condensed printingCancel expanded printing Semi-condensedSelect proportional spacing Cancel one-line expanded printingExpanded printing for one line Select character widthSelect master print mode Select fixed spacingIncrease character spacing Select double or quadruple size Select character sizePrint double-height characters Select character height, width, and line spacing Return to normal heightSet line spacing to n/360 inch Set line spacing to l/8 inchSet line spacing to 7160or 7/72 inch Set line spacing to l/6 inchSet base unit for line spacing Set line spacing to n/180 inch or n/216 inchSet line spacing to n/60 inch or n/72 inch Line feed Select forward feed modeSelect reverse feed mode Execute ESSet top of page at current position Perform one n/l804nch or n/216=inch line feedPerform one n/180-inch reverse line feed Feed paper n linesCancel bottom margin Set page length to n inchesSet bottom margin Set vertical tab stops Disable paper-out detectorEnable paper-out detector Return to top of currentVertical tab Set vertical tab stops every n linesSet vertical tab stops in channel Select vertical tab channelSet right margin Set left marginSet automatic line feed Cancel automa tic line feedSet left and right margins Carriage returnFull justify Left justifyCenter text Right justifyHorizontal Tab Reset all tab stopsSet horizontal tab stops Set horizontal tab stops every n columnsAbsolute horizontal tab in columns Relative horizontal TabRelative horizontal tab in inches Absolute horizontal tab in inchesPrint quadruple-density g-bit graphics Print normal-density g-bit graphicsPrint double-density g-bit graphics Print double-density, double-speed g-bit graphicsPrint hex-density 24-bit graphics Se/ect graphics modeConvert graphics Density Seiecf graphics modeDefine download characters ?n4 Copy character set from ROM into RAM Select download character setShift download character area Select LQ pica download characters Select draft pica download character setSelect draft elite download character set Select draft condensed download charactersSelect ROM character set Select L Q elite download charactersSelect LQ condensed download characters Select LQ proportional download charactersSet MSB to Select print colorSet printer off-line Cancel last lineAccept MSB as is Delete last character sentUnidirectional printing Stop printingBell Bidirectional printingEject paper from ASF Reset printerManual feed Auto feed

NX-2420 specifications

The Star Micronics NX-2420 is a leading-edge thermal printer designed to meet the diverse demands of modern businesses. Renowned for its compact design and robust build, the NX-2420 excels in performance and versatility, making it an ideal choice for retail, hospitality, and various other industries.

One of the standout features of the NX-2420 is its high-speed printing capability. With a print speed of up to 200 millimeters per second, it ensures that transactions are completed promptly, delivering receipts and labels without delay. This efficiency helps businesses provide superior customer service, especially during peak hours.

The NX-2420 supports multiple paper widths, accommodating various label and receipt sizes. This flexibility allows businesses to tailor their printing solutions to fit specific needs, whether they require larger labels for shipping or smaller receipts for purchases. The printer also utilizes direct thermal printing technology, eliminating the need for ink or toner. This not only reduces ongoing operational costs but also minimizes maintenance efforts, making it a user-friendly option.

Connectivity is a crucial aspect of the NX-2420. It offers a range of connectivity options, including USB, Ethernet, and Bluetooth, enabling seamless integration with existing systems and wireless printing from mobile devices. This flexibility is particularly beneficial for businesses that utilize point-of-sale (POS) systems and want to enhance their overall operational efficiency.

Another notable characteristic of the NX-2420 is its durability. Built to withstand the rigors of a busy environment, this printer features a robust casing and is designed to handle high-volume printing tasks. Furthermore, it operates quietly, contributing to a more pleasant working atmosphere for staff and customers alike.

In addition to standard printing capabilities, the NX-2420 is also equipped with advanced features such as an integrated cutter for precise label cutting and an optional built-in camera that enhances functionality in specific applications. This adaptability makes the NX-2420 suitable for a wide range of scenarios, from retail checkout counters to inventory management systems.

In conclusion, the Star Micronics NX-2420 is an exceptional thermal printer that combines speed, durability, and versatility. With its array of features and technologies, it stands out as a reliable choice for businesses looking to enhance their printing solutions and improve operational efficiency. Whether for creating receipts, labels, or tickets, the NX-2420 is poised to meet the demands of today's dynamic business environment.
Top Page Image Contents